Panasonic SDR-S10 User Manual
36
VQT1E14
Setup
Adjusting the LCD
monitor
monitor
1
Press the MENU button, then
select [SETUP]
select [SETUP]
# [LCD SET]
# [YES] and then press the
cursor button in the centre.
2
Press the cursor button up or
down to select the item to be
adjusted. Then, press the
button left or right to make the
adjustment.
down to select the item to be
adjusted. Then, press the
button left or right to make the
adjustment.
The bar display moves.
≥ Press the MENU button to exit the
≥ Press the MENU button to exit the
menu screen.
[BRIGHTNESS]:
Brightness of the LCD monitor
[COLOUR]:
colour level of the LCD monitor
Brightness of the LCD monitor
[COLOUR]:
colour level of the LCD monitor
≥ These settings will not affect the
images actually recorded.
Press the MENU button, then
select [SETUP]
select [SETUP]
# [POWER LCD]
# [ON] and then press the cursor
button in the centre.
The [
] indication appears on the LCD
monitor.
≥ Set [POWER LCD] to [ON] if the
≥ Set [POWER LCD] to [ON] if the
surroundings are bright and the LCD
monitor is difficult to see. The entire
LCD monitor will become approx. twice
as bright as usual.
monitor is difficult to see. The entire
LCD monitor will become approx. twice
as bright as usual.
To cancel POWER LCD
Press the MENU button then select
[SETUP]
[SETUP]
# [POWER LCD] # [OFF] and
then press the carsor button in the
centre.
≥ The [
centre.
≥ The [
] indication disappears and
the original brightness is restored.
≥ This will not affect the images to be
recorded.
≥ If you turn on the unit when the AC
adaptor is used, this function will
automatically be activated.
automatically be activated.
Adjusting the brightness
and colour level
and colour level
Increasing and decreasing
the brightness of the entire
LCD monitor
the brightness of the entire
LCD monitor
VQT1E14(EB_GC_ENG).book 36 ページ ２００７年２月２８日 水曜日 午後２時２３分