Panasonic HC-X1000 User Manual
- 109 -
3
Touch [RECORDER] on the screen of this unit.
≥ When you select an option other than [RECORDER], reconnect the USB cable.
4
Touch the media you wish to dub.
≥ When using the battery, the LCD monitor turns off after about 5 seconds. Touch the screen to turn
the LCD monitor on.
5
Dubbing through operations on the Blu-ray disc recorder or high-definition
(AVCHD) compatible DVD recorder.
(AVCHD) compatible DVD recorder.
≥ Do not touch [CHANGE MEDIA] on the screen of the unit during dubbing.
≥ Do not use any other USB cables except the supplied one. (Operation is not guaranteed with any
other USB cables.)
≥ For details on dubbing and playback methods, read the operating instructions of the Blu-ray disc
recorder or DVD recorder.
≥ When you connect the unit to a Blu-ray disc recorder, a dubbing operations screen may appear
on the television connected to the Blu-ray disc recorder. In this case as well, perform the
operations of Steps 2 to 5.
operations of Steps 2 to 5.
≥ You cannot switch the Recording Mode/Playback Mode by pressing the THUMBNAIL button on
this unit while the Blu-ray disc recorder or DVD recorder is connected. Disconnect the USB cable
before performing either of these operations.
before performing either of these operations.
≥ If the battery runs down during dubbing, a message will appear. Operate the Blu-ray disc recorder
to cancel the dubbing.
About the screen indication of the unit
When the unit is accessing the SD card, card access icon (
When the unit is accessing the SD card, card access icon (
) appears on the unit screen or
the access lamp is on.
≥ Be careful not to disconnect the USB cable, AC adaptor or battery while the unit is accessing
≥ Be careful not to disconnect the USB cable, AC adaptor or battery while the unit is accessing
the media, as this may result in the loss of recorded content.