Panasonic HC-X1000 User Manual
- 120 -
To use the Wi-Fi function, connect this unit to a wireless access point or smartphone via Wi-Fi.
∫ About the connection status icon when connected to Wi-Fi
Using the Network Easy Setup to set up a connection
With the smartphone application “Image App”, you can transfer the following information between
the smartphone and this unit by using the NFC or QR code function.
the smartphone and this unit by using the NFC or QR code function.
≥ Install the smartphone application “Image App” on your smartphone.
≥ Register [Wi-Fi] to a USER button. (
≥ Register [Wi-Fi] to a USER button. (
)
≥ Set the NFC function of the smartphone to ON.
1
Press the USER button to which [Wi-Fi] is registered, and turn on the Wi-Fi
function.
function.
2
Select the menu.
≥ Touch [YES].
3
Start up the smartphone application “Image App”.
4
Touch the smartphone on
of this unit.
≥ Touch the NFC mark while a message asking you to touch the NFC mark on the device is
displayed on the smartphone screen.
≥ If this is the first time the smartphone is connecting to this unit, touch [YES] on the screen of this
unit, and then touch the smartphone on
of this unit again.
≥ When the connection is complete, the setup screen is displayed on the smartphone.
Setting Up a Wi-Fi Connection
A The connection status icon
When connected to wireless access point:
connected to Wi-Fi/
not connected to Wi-Fi
≥ The display will change as follows according to the
radio wave intensity:
(Weak)
#
#
#
(Strong).
When directly connected:
connected to Wi-Fi/
not connected to Wi-Fi
With Network Easy Setup, you can set the following information:
≥ Clock information (synchronizing the clock information with that of the smartphone)
≥ Information on wireless access points (SSIDs and Passwords)
≥ Clock information (synchronizing the clock information with that of the smartphone)
≥ Information on wireless access points (SSIDs and Passwords)
If the device is Android (NFC-compatible)
: [Wi-Fi Setup]
# [Wi-Fi Easy Setup]
MENU