Panasonic HC-X1000 User Manual
- 43 -
≥ Focus Assist is canceled in following cases:
j If you turn the unit off
j If you press the THUMBNAIL button
j When the setting of [FOCUS ASSIST] (
j If you press the THUMBNAIL button
j When the setting of [FOCUS ASSIST] (
) is changed
j When EVF/LCD detail is enabled. (
)
j When you set this unit to Intelligent Auto Mode using the iA/MANU switch.
j When you set the FOCUS A/M/¶ switch to [A]
j When you press the USER button to which [FOCUS TRANSITION] is registered or touch the
j When you set the FOCUS A/M/¶ switch to [A]
j When you press the USER button to which [FOCUS TRANSITION] is registered or touch the
applicable USER button icon (
)
≥ The magnified display and peaking are not displayed on recorded images.
≥ The magnified display and peaking are not displayed on a TV.
≥ Freeze Frame is not available when you use Focus Assist. (
≥ The magnified display and peaking are not displayed on a TV.
≥ Freeze Frame is not available when you use Focus Assist. (
≥ Peaking may not be displayed when you use Digital Zoom (
). To zoom in and use peaking at
the same time, we recommend setting [FOCUS ASSIST] to [BOTH] and increasing the
magnification level of the magnified display.
magnification level of the magnified display.
(Notes on the magnified display of Focus Assist)
≥ Some information on the screen disappears when the screen is magnified.
≥ Still pictures cannot be recorded when the screen is magnified.
≥ In the following cases, the screen is not magnified during Focus Assist:
≥ Some information on the screen disappears when the screen is magnified.
≥ Still pictures cannot be recorded when the screen is magnified.
≥ In the following cases, the screen is not magnified during Focus Assist:
j During motion picture recording or PRE-REC (
)
j When using Digital Zoom
j When using Area Mode (
j When using Area Mode (
≥ If you set the magnification level of the magnified display to 5.5k or higher, peaking may not be
displayed when using i.Zoom (
Focus Transition
You can use Focus Transition by registering “Focus Transition” to a USER button. With Focus
Transition, you can shift the current focus position to a pre-registered focus position.
≥ Please refer to page
Transition, you can shift the current focus position to a pre-registered focus position.
≥ Please refer to page
for details about setting the USER button.
To use Focus Transition, you need to register a focus position.
≥ You can register up to three focus positions.
≥ Switch to Manual Mode. (
≥ You can register up to three focus positions.
≥ Switch to Manual Mode. (
)
1
Select the menu.
≥ The current focus position will be registered as an initial position.
2
Adjust the focus by rotating the focus ring.
3
Touch the item to which you want to register the focus position.
≥ The icon of the item to which the focus position has been registered will be highlighted in yellow.
≥ To select a different item, perform the operations in Steps 2
≥ To select a different item, perform the operations in Steps 2
s3.
Registering a focus position
: [CAMERA SETUP]
# [FOCUS TRANSITION] # [Setup]
[1]/[2]/[3]
MENU