Panasonic HC-X1000 User Manual
- 58 -
Setting the Time Code
Time code will display the recording time in hours, minutes, seconds, and frames.
TC 00:00:00:00 (hour : minute : second : frame [NDF])
TC 00:00:00.00 (hour : minute : second . frame [DF])
≥ The number of frames (frame count per second) varies depending on the frame rate in
TC 00:00:00:00 (hour : minute : second : frame [NDF])
TC 00:00:00.00 (hour : minute : second . frame [DF])
≥ The number of frames (frame count per second) varies depending on the frame rate in
[REC FORMAT]. (
Select the compensation mode for the time code.
≥ Set [SYSTEM FREQ] to [59.94Hz(NTSC)]. (
≥ Set [SYSTEM FREQ] to [59.94Hz(NTSC)]. (
≥ When the frame rate in [REC FORMAT] is 24p or during Time Lapse Recording, this item will be
set to [NDF] automatically.
≥ This item will be automatically set to [NDF] and will not be displayed as a menu item when
[SYSTEM FREQ] is set to [50Hz(PAL)]. (
)
Sets the way the time code will move.
* If the frame rate in [REC FORMAT] is set to 24p, a slight time error may occur when switching to
Playback Mode.
≥ It is automatically set to [FREE RUN] when PRE-REC is enabled or [2 SLOTS FUNC.] (
) is
set to [BACKGROUND].
≥ It is automatically set to [REC RUN] when it is during the Interval Recording.
Frame rates in [REC FORMAT]
Frame
60p/60i/30p
0 to 29
50p/50i/25p
0 to 24
24p
0 to 23
[TC MODE]
: [TC/UB SETUP]
# [TC MODE] # desired setting
[DF]:
Time code is compensated in accordance with the actual time. It is
mainly used for broadcasting such as TV programs.
mainly used for broadcasting such as TV programs.
[NDF]:
It will not compensate the time code. (There will be a difference from
the actual time)
the actual time)
[TCG]
: [TC/UB SETUP]
# [TCG] # desired setting
[FREE RUN]
*
:
It will constantly move.
[REC RUN]:
It will move only when recording.
MENU
MENU