Panasonic HC-X1000 User Manual
- 61 -
Each of the USER button can register one function from the 24 available functions.
≥ There are six USER buttons (USER1 to USER6) on the main body and four USER button icons
≥ There are six USER buttons (USER1 to USER6) on the main body and four USER button icons
(USER7 to USER10) displayed on the LCD monitor.
Setting the USER button
1
Select the menu.
2
Touch the USER button you wish to set.
≥ The USER button number and currently set function name are displayed. (For example, a display
of 1. [DRS] means that [DRS] has been assigned to USER1 button.)
3
Touch the item to register.
≥ For the functions of the USER button that can be registered, refer to page
≥ Touch [INH] (Inhibit) if not registering.
≥ Next (Previous) page can be displayed by touching
≥ Next (Previous) page can be displayed by touching
/
.
≥ To continuously set other USER buttons, repeat Steps 2-3.
4
Touch [EXIT] to complete the setting.
≥ The tables below show the default settings.
≥ Performing [INITIAL SET] in [ALL] restores these default settings. (
≥ The default setting for the USER5 button is [FOCUS ASSIST].
If you change the user button function for the USER5 button, a newly registered USER button
function will work instead of the Focus Assist function.
function will work instead of the Focus Assist function.
≥ The default setting for the USER6 button is [REC CHECK].
If you change the user button function for the USER6 button, a newly registered USER button
function will work instead of the Recording Check function.
function will work instead of the Recording Check function.
USER button
: [SW SETUP]
# [USER BUTTON SETUP]
USER1 button
[DRS]
USER6 button
[REC CHECK]
USER2 button
[D.ZOOM]
USER7 button
[FRZ FRAME]
USER3 button
[BACKLIGHT]
USER8 button
[EVF/LCD DETAIL]
USER4 button
[Wi-Fi]
USER9 button
[ATW LOCK]
USER5 button
[FOCUS ASSIST]
USER10 button
[MENU]
MENU