Panasonic HC-X1000 User Manual
- 94 -
6
Touch [PC] on the screen of this unit.
≥ This unit is automatically recognized as an external drive of the PC. (
)
≥ When you select an option other than [PC], reconnect the USB cable.
≥ When using the battery, the LCD monitor turns off after about 5 seconds. Touch the screen to turn
≥ When using the battery, the LCD monitor turns off after about 5 seconds. Touch the screen to turn
the LCD monitor on.
≥ Do not use any other USB cables except the supplied one. (Operation is not guaranteed with any
other USB cables.)
≥ When performing reading/writing between a PC and an SD card, be aware that some SD card
slots built into PCs and some SD card readers are not compatible with the SDHC Memory Card or
SDXC Memory Card.
SDXC Memory Card.
≥ When using an SDXC Memory Card, check the following support site.
http://panasonic.net/avc/sdcard/information/SDXC.html
Using this unit as a card reader
When this device and a computer for editing are connected using a USB Connection Cable, image
data in the SD card can be copied.
≥ Concerning non-linear editing, refer to the instruction manual of your editing software.
data in the SD card can be copied.
≥ Concerning non-linear editing, refer to the instruction manual of your editing software.
To use this unit as a card reader, you need a PC that meets the following system requirements.
≥ Even if the system requirements mentioned in this owner’s manual are fulfilled, some PCs cannot
≥ Even if the system requirements mentioned in this owner’s manual are fulfilled, some PCs cannot
be used.
≥ The USB equipment operates with the driver installed as standard in the OS.
∫ If using Windows
≥ Operation is not guaranteed in the following cases.
j Operation on an upgraded OS.
j Operation on an OS other than the one pre-installed.
j Operation on an OS other than the one pre-installed.
About the screen indication of the unit
≥ Do not disconnect the USB cable, battery, or AC adaptor while the access lamp is on or card
≥ Do not disconnect the USB cable, battery, or AC adaptor while the access lamp is on or card
access icon (
) appears on the unit screen.
≥ If the screen does not change when the unit is operated while connected to a PC, disconnect
the battery and/or AC adaptor, wait approximately 1 minute, reconnect the battery and/or AC
adaptor, wait approximately 1 minute again, and then turn the unit back on. (Data may be
destroyed when above operation is performed while accessing the SD card.)
adaptor, wait approximately 1 minute again, and then turn the unit back on. (Data may be
destroyed when above operation is performed while accessing the SD card.)
Operating environment (mass storage)
OS
Windows 8/Windows 8.1 (32 bit/64 bit)
Windows 7 (32 bit/64 bit) SP1
Windows 7 (32 bit/64 bit) SP1
CPU
1 GHz or higher
32-bit (k86) or 64-bit (k64) processor (including compatible CPU)
32-bit (k86) or 64-bit (k64) processor (including compatible CPU)
RAM
2 GB or more (64 bit)/1 GB or more (32 bit)
Interface
USB port
Other requirements Mouse or equivalent pointing device