Panasonic SDR-H80 User Manual

Page of 32
16
LSQT1467 (ENG)
This unit has an internal HDD. The HDD is a 
precision instrument so take care when handling it.
∫ Do not cause any vibrations or 
impacts to this unit
Impact may cause the HDD to malfunction. 
≥ The HDD may no longer be recognised by this unit.
≥ Recording may no longer be possible on the HDD.
≥ Playback of contents stored on HDD may no 
longer be possible.
During recording or playback:
≥ Do not cause vibrations or any impact to the HDD.
∫ Do not drop this unit
The HDD may be damaged if this unit receives a 
strong impact due it to being dropped etc.
This unit has a drop detection function to protect 
the HDD from impact if the unit is dropped. If it 
detects that the unit has been dropped during 
motion picture recording, the HDD protection 
operation sound may be recorded. Also if it 
detects that the unit is being continuously 
dropped, recording or playback may stop.
∫ Take note of the temperature of 
this unit
It may no longer be possible to record or 
playback if the temperature of this unit is too high 
or low. A warning message will appear on this 
unit’s LCD monitor if an irregularity in the 
temperature is detected.
∫ Do not use the unit in a low 
pressure area
The HDD may be damaged if you use this unit 
where the altitude is more than 3000 m.
∫ Back up important recorded data 
to protect it
Save recorded data periodically on a PC, DVD 
disc, etc. for backup purposes.
If the HDD fails, the recorded data cannot be repaired.
∫ Notes for recording
Images may not be recorded properly to the HDD 
near high-volume speakers due to the vibration 
from the speakers. In such cases, record in a 
location away from the speakers or use an SD card.
∫ About disposing of or giving 
away this unit
HDD access lamp [ACCESS HDD]
≥ When this unit accesses the HDD, the lamp 
lights up.
≥ When lamp is on, do not
sExpose the unit to strong vibrations or 
impacts
sOperate the mode dial
sRemove the battery or disconnect the AC 
adaptor
≥ Performing the above while lamp is on may 
result in damage to data/HDD or this unit. 
However, the access lamp is supposed to light 
up while rotating the dial to select a mode. In 
this case, there is no problem.
SD card access lamp [ACCESS]
≥ When this unit accesses the SD card, the lamp 
lights up.
≥ When lamp is on, do not
sOpen the SD card slot cover and remove 
the SD card
sOperate the mode dial
sRemove the battery or disconnect the AC 
adaptor
≥ Performing the above while lamp is on may 
result in damage to data/SD card or this unit. 
However, the access lamp is supposed to light 
up while rotating the dial to select a mode. In 
this case, there is no problem.
HDD handling
Read the Operating Instructions (PDF format)
∫ Indemnity about recorded 
content
Panasonic does not accept any responsibility 
for damages directly or indirectly due to any 
type of problems that result in loss of 
recording or edited content, and does not 
guarantee any content if recording or editing 
does not work properly. Likewise, the above 
also applies in a case where any type of repair 
is made to the unit (including any other non-
HDD related component).
Access lamp
SDR-H90&80EP-LSQT1467_mst.book  16 ページ  2008年12月2日 火曜日 午後2時32分