Panasonic SDR-H80 User Manual

LSQT1467 (ENG)

Recording

[HDD] [SD]

≥ Open the lens cover before turning the unit on.

Select the recording destination 
by the menu. (l 19)

To end the recording
Press the recording start/stop button again.
≥ [¥] and [;] are red during recording. Do not 

move this unit until [;] is green.

≥ The images recorded between pressing the 

recording start/stop button to start recording 
and pressing it again to pause recording 
become one scene.
The scene is automatically divided when the 
recorded data exceeds 3.9 GB. (The recording 
will continue.)

≥ When about 5 minutes have passed without 

any operation in recording pause, the unit 
automatically turns off to save battery life. 
To use the unit, turn it on again.
This economy feature can also be set to [OFF].

∫ Screen indications

A Recording mode
B Selected recording destination
C Remaining time left for recording

When the remaining time is less than 
1 minute, [R 0h00m] flashes red.

D Recording time elapsed

Each time the unit enters the recording 
pause mode, the counter display will be reset 
to “0h00m00s”.

≥ While motion picture recording is in progress, 

the recording will not stop even if the LCD 
monitor is closed.

≥ Do not disconnect the AC adaptor or remove 

the battery if the unit is in recording mode. This 
may cause a repair message to appear when 
powered up again.

# [HDD] or 








SDR-H90&80EP-LSQT1467_mst.book  22 ページ  ２００８年１２月２日　火曜日　午後２時３２分