Panasonic SDR-S50 User Manual

Page of 116
104
VQT2N91
Problem
Check points
This unit cannot be 
operated though it is 
turned on.
This unit does not 
operate normally.
≥ Remove the battery or AC adaptor, wait about 
1 minute and then reconnect the battery or AC 
adaptor. Then about 1 minute later, turn on the 
power again. (Conducting the above operation while 
the media is being accessed may damage the data 
on the media.)
≥ If normal operation is still not restored, detach the 
power connected, and consult the dealer who you 
purchased this unit from.
The remaining time 
indication or the 
elapsed time 
indication is not 
shown.
≥ If you set [SETUP] 
> [DISPLAY] > [OFF], 
indications other than warnings and date etc. are not 
displayed. (l 25)
The unit arbitrarily 
stops recording.
≥ Use an SD card that can be used for motion picture 
recording. (l 18)
≥ The recordable time may have shortened due to the 
deterioration of the data writing speed or repeated 
recording and deletion. Using the unit, format the SD 
card, built-in memory or HDD (l 74)
/
≥ If the unit is exposed to strong vibrations or shocks 
while recording on HDD, recording may stop to 
protect the HDD. If the unit is used in a place with 
loud sounds, the recording may stop due to sound 
vibrations. Recording data on an SD card is 
recommended in these places.
Auto focus function 
does not work.
≥ Set to Intelligent auto mode to on.
≥ If you are trying to record a scene which is hard to 
bring into focus in auto focus mode, use the manual 
focus mode to adjust the focus. (l 33, 58)
Colour balance of 
images is strange 
when recording in a 
place such as a 
gymnasium.
≥ In a place with multiple light sources, such as a 
gymnasium or a hall, set the white balance setting to 
 (Indoor mode2). If you cannot record clearly 
with the 
 (Indoor mode2), set it to 
 (Manual 
adjustment mode). (l 56)
SDR-H95
SDR-H85