Panasonic SDR-S150 User Manual

VQT0X39

Others

When condensation forms on the unit, 
the lens will cloud up and the unit may 
not work properly. Make every effort to 
ensure that condensation does not form. 
If it does form, take the actions described 
below. 

Condensation takes place when the 
ambient temperature or humidity is 
changed as follows.
≥ When this unit is brought inside from 

the cold (e.g. a ski slope) to a warm 
room.

≥ When this unit is moved from an 

air-conditioned car to outside.

≥ When a cold room has been warmed 

up quickly.

≥ When cool wind from an air conditioner 

is directly blown onto this unit.

≥ After summer afternoon showers of 

rain.

≥ When this unit is in a very humid place 

where the air is thick with steam. (e.g. 
a heated swimming pool)

When this unit is taken to a location 
with a significant temperature 
difference such as from a cold place 
to a hot place.
If, for example, you have used this unit for 
recording on a ski slope and are taking it 
into a heated room, place the unit inside 
a plastic bag, remove as much of the air 
from inside the bag as possible, then seal 
the bag. Leave the unit for about an hour 
in the room so the temperature of the unit 
is close to the ambient temperature of the 
room, then use it.

Remove the battery or disconnect the AC 
adaptor and leave the unit for about 
1 hour. When the unit becomes close to 
the ambient temperature, the fog 
disappears naturally.

°] appears 

≥ Did you press the record button or any other button?

> You cannot record onto the card in the WEB camera 

mode.

≥ Have you installed the Web camera driver?

> Install the driver, then check the connections.

≥ The unit is connected to a Windows XP PC in still 

picture playback mode.
> Connect with a printer supporting PictBridge.

≥ The unit is connected to the printer in motion picture 

recording mode or still picture recording mode.
> Change the mode to still picture playback mode.

VQT0X39ENG.book  106 ページ  ２００６年６月１４日　水曜日　午前１０時５１分