Panasonic SDR-S150 User Manual
36
VQT0X39
This unit records in VBR. VBR is an abbreviation for Variable Bit Rate. VBR recording
automatically varies the bit rate (amount of data in a fixed time) depending on the
subject being recorded. This means if a subject with sharp movements is recorded, the
recording time per SD card is reduced.
automatically varies the bit rate (amount of data in a fixed time) depending on the
subject being recorded. This means if a subject with sharp movements is recorded, the
recording time per SD card is reduced.
∫ When recording stops suddenly during motion picture recording
When using an SD card on which data has been written many times and the data
writing speed has reduced, the recording may suddenly stop during motion picture
recording. At this time, the following message will appear:
writing speed has reduced, the recording may suddenly stop during motion picture
recording. At this time, the following message will appear:
When using an SD card (P35) that can be used for motion picture recording
When this kind of message appears, it is recommended that you format the SD card
being used. (P68) When an SD card is formatted, all the data recorded on it will be
deleted so copy valuable data to the PC prior to formatting. (P83) (We recommend
using MotionSD STUDIO etc. to acquire data recorded on this unit. (P76))
When this kind of message appears, it is recommended that you format the SD card
being used. (P68) When an SD card is formatted, all the data recorded on it will be
deleted so copy valuable data to the PC prior to formatting. (P83) (We recommend
using MotionSD STUDIO etc. to acquire data recorded on this unit. (P76))
When using any other card
When motion pictures are to be recorded, use a Panasonic SD card or another SD card
which can be used to record motion pictures. (P35)
When motion pictures are to be recorded, use a Panasonic SD card or another SD card
which can be used to record motion pictures. (P35)
Motion picture recording (MPEG2 motion pictures) (continued)
≥ Recordable time using the battery
(P18)
≥ 8 MB and 16 MB SD cards cannot be
used for motion picture recording.
≥ If the write protection switch on the SD
card is set to [LOCK], it cannot be used
for recording. (P16)
for recording. (P16)
≥ Even if there is available memory for
recording on the SD card, it may not be
possible to record. In this case, after
saving the data on PC, format the SD
card.
possible to record. In this case, after
saving the data on PC, format the SD
card.
≥ The sound is recorded in stereo.
≥ The recorded scenes are recorded on
≥ The recorded scenes are recorded on
the SD card as one motion picture scene.
≥ When recording is resumed after it was
stopped, the scenes will be saved in a
different scene.
different scene.
≥ When recording motion pictures, do not
remove the battery or disconnect the AC
adaptor. Also do not remove the SD card
while the [ACCESS] lamp is lit. If you do
either of the above, a restore motion
picture scene message is displayed
when the SD card is next inserted or the
power is turned back on. Be sure to
restore the motion picture scene. (P100)
adaptor. Also do not remove the SD card
while the [ACCESS] lamp is lit. If you do
either of the above, a restore motion
picture scene message is displayed
when the SD card is next inserted or the
power is turned back on. Be sure to
restore the motion picture scene. (P100)
≥ Mosaic-pattern noise may appear on a
playback image in the following cases.
– When there is a complicated pattern in
the background
– When the unit is moved too much or too
fast
– When a subject with sharp movements
has been recorded
(Particularly if [
(Particularly if [
REC MODE] was set
to [
] during recording.)
REC STOPPED.
NOW WRITING.
NOW WRITING.
CARD MAY NOT BE
CHECK CARD.
SUITABLE.
LP
VQT0X39ENG.book 36 ページ ２００６年６月１４日 水曜日 午前１０時５１分