Panasonic HCX920 User Manual

Page of 120
- 99 -
≥ Do not use any other USB cables except the supplied one. (Operation is not guaranteed with any 
other USB cables.)
≥ When this unit is connected to a PC using a USB cable while the unit is turned on, power is also 
supplied from the PC to this unit.
≥ When performing reading/writing between a PC and an SD card, be aware that some SD card 
slots built into PCs and some SD card readers are not compatible with the SDHC Memory Card or 
SDXC Memory Card.
≥ When using an SDXC Memory Card, check the following support site.
http://panasonic.net/avc/sdcard/information/SDXC.html
∫ To disconnect USB cable safely
Select the 
 icon in task tray displayed on the PC, and then click [Eject Panasonic Video 
Camera].
≥ Depending on your PC’s settings, this icon may not be displayed.
About the screen indication of the unit
≥ Do not disconnect the USB cable, the battery, or the AC adaptor
*
 while the access lamp is on 
or card access icon (
) appears on the unit screen.
Do not disconnect the USB cable, the battery or the AC adaptor while the access lamp is on or 
built-in memory access icon (
) appears on the unit screen.
≥ If the screen does not change when the unit is operated while connected to a PC, disconnect 
the battery and/or AC adaptor
*
, wait approximately 1 minute, reconnect the battery and/or AC 
adaptor
*
, wait approximately 1 minute again, and then turn the unit back on. (Data may be 
destroyed when above operation is performed while accessing the SD card or built-in 
memory.)
*
/
/
 
only