Panasonic SDR-S10PC User Manual
40
VQT1D97
Setup
Setting date and time
When the unit is turned on for the first
time, a message asking you to set the
date and time will appear.
≥ Select [YES] and press the cursor
time, a message asking you to set the
date and time will appear.
≥ Select [YES] and press the cursor
button in the center. Perform steps 2
and 3 below to set the date and time.
and 3 below to set the date and time.
If the screen shows the incorrect date
and time, then adjust it.
and time, then adjust it.
¬Rotate the mode dial to select
or
.
1
Press the MENU button, then
select [BASIC]
select [BASIC]
#
[CLOCK SET]
# [YES] and
then press the cursor button
in the center.
in the center.
2
Press the cursor button left or
right to select the item to be
set. Then, press the button up
or down to set the desired
value.
right to select the item to be
set. Then, press the button up
or down to set the desired
value.
≥ The year will change as follows:
2000, 2001, ..., 2099, 2000, ...
≥ The 12-hour system is used to
display the time.
3
Press the cursor button in the
center to enter the selection.
center to enter the selection.
≥ The clock function starts at
[00] seconds when the cursor
button in the center is pressed.
button in the center is pressed.
≥ After pressing the MENU button to
finish the setting, check the date
and time display.
and time display.
∫ Changing the date and time
display style
Press the MENU button, then select
[SETUP]
[SETUP]
# [DATE/TIME] # desired
display style and then press the
cursor button in the center.
cursor button in the center.
[DATE]
[D/T]
[OFF]
DEC.15.2007
DEC.15.2007 3:30 PM
VQT1D97(ENG).book 40 ページ 2007年3月20日 火曜日 午後5時33分