Panasonic NV-DS65 User Manual

≥Even if Playback Digital Zoom Functions are 

being used, images that are output from the DV 
Terminal (

l 7) or Digital Still Picture Terminal 

l 37) are not enlarged.

≥As you enlarge an image, the quality of image 

suffers.

ª Audio Dubbing

≥The blank section of a tape cannot be dubbed.
≥Sounds sent through the DV Terminal cannot be 

dubbed.

≥If a tape has a non-recorded portion when the 

tape is dubbed, images and sounds may be 
disturbed when this portion of the tape is played 
back.

≥If you set the tape counter back to 0 at the 

position where you want to stop Audio Dubbing 
so as to make it possible to use the Memory 
Stop Function (

l 57), Audio Dubbing is 

terminated automatically when the tape reaches 
this position.

≥In the case of importing data recorded with 

Audio Dubbing to a PC using the PC’s software 
programme, only the original sound (ST1) may 
be imported, depending on the software 
programme.

ª Recording the Contents of Other 

≥When the Movie Camera is connected with other 

digital video equipment through its DV Terminal, 
images recorded in analog form from other 
external equipment can be output to the digital 
video equipment through the DV Terminal.

ª Using the DV Cable for Recording 

≥Regardless of the setting, digital dubbing is 

carried out automatically in the same audio 
recording mode as that of the Cassette on the 
playback-side.

≥The images on the monitor of the recording side 

may be disturbed, but it does not affect the 
recorded images.

≥Even if Playback Digital Effects or Playback 

Digital Zoom Function have been used, these 
effects are not output from the DV Terminal.

≥Even if you use device equipped with DV 

Terminals (such as IEEE1394), you may not be 
able to perform Digital Dubbing in some cases.

≥Do not connect both an S-Video Cable or AV 

Cable and a DV Cable.

ª Recording on a Card

≥You cannot record still images from the tape to 

the Card when a USB Cables is connected.

≥The sound cannot be recorded.
≥The Shutter Effect cannot be used.
≥Pictures with wide-screen format signals cannot 

be copied.

≥Even if Playbak Digital Effects (MIRROR, 

MOSAIC, SEPIA, B/W) have been used, these 
effects do not affect the recording.

≥Multi-Picture cannot be recorded.

ª Playing Back a Card 

≥If a blank (nothing recorded) Card is played, the 

screen becomes white and the [NO PICTURE] 
Indication appears.

≥If you attempt to play back a still picture recorded 

in a different format or a picture whose image 
data is defective, the [INCOMPATIBLE IMAGE] 
Indication could appear as warning.

≥This Movie Camera can also play back the 

Mega-Pixel still pictures recorded with the other 
equipment. However it takes longer than usual 
time.

≥When the size of the picture played back is over 

[1280

k960], the picture played back in small 

size on the LCD Monitor.

ª Photo Title

≥The Photo Title Function and Digital Function 

cannot be used simultaneously.

≥After recording, the Photo TItle setting is cleared 

automatically.

≥The Photo Title Function cannot be used when a 

DV Cable is connected.

ª Formatting a Card 

If a Card becomes unreadable by the Movie 
Camera, formatting it may make it reusable. 
Formatting erases all the data recorded on a 
Card.
≥When the formatting is completed, the 

[NO PICTURE] Indication appears.

≥It may not be possible to use the Card which was 

formatted using this Movie Camera on another 
unit. In this case, format the Card on the unit 
which will be using the Card. Take steps to 
ensure that valuable pictures are stored on the 
personal computer, etc. as well before 
proceeding.

ª DPOF

≥Perform the DPOF Settings with your own Movie 

Camera in use.

≥Verifying the DPOF Settings may take a little 

time. Wait until the [ACCESS] Lamp goes out.

ª Using a Card in a Personal 

≥To erase pictures that you recorded on the Card 

by using the Movie Camera, be sure to erase 
them on the Movie Camera, not on the 
computer.

EG-ENG.book  49 ページ  ２００３年１月６日　月曜日　午後３時４３分