Panasonic NV-GS27EB User Manual
Record mode
22
LSQT1006
≥Playback of the image on other digital video
equipment recorded in the LP mode.
≥Slow/frame-by-frame playback.
Recording on a tape
Remove the lens cap. (
-7-
)
(When the camera is turned on with the lens cap
fitted, the automatic white balance adjustment
may not function properly. Please turn the camera
on after removing the lens cap.)
≥Set to Tape Recording Mode.
fitted, the automatic white balance adjustment
may not function properly. Please turn the camera
on after removing the lens cap.)
≥Set to Tape Recording Mode.
1
Press the recording start/stop button to
start recording.
start recording.
2
Press the recording start/stop button again
to pause recording.
to pause recording.
≥For the recording time on a tape, refer to
-9-
.
≥Carry out a recording check (
-22-
) to verify that
the image is recorded properly.
≥In order to find the unrecorded section, carry out
the blank search (
-23-
).
≥If you want to preserve the original sound
recorded when audio dubbing (
-35-
), set
[ADVANCED] >> [AUDIO REC] >> [12bit] to
take pictures.
take pictures.
ª
On-screen display in the tape
recording mode
recording mode
1) Recording time elapse
2) Remaining tape indication
2) Remaining tape indication
ª
Concerning the remaining tape time
indication on the screen
indication on the screen
≥The remaining tape time is indicated in minutes.
(When it reaches less than 3 minutes, the
indication starts flashing.)
indication starts flashing.)
≥During a 15 seconds or shorter recording, the
remaining tape time indication may not be
displayed or the remaining tape time may not be
displayed correctly.
displayed or the remaining tape time may not be
displayed correctly.
≥In some cases, the remaining tape time
indication may display remaining tape time that
is 2 to 3 minutes shorter than the actual
remaining tape time.
is 2 to 3 minutes shorter than the actual
remaining tape time.
Recording check
The last image recorded is played back for 2 to
3 seconds. After checking, the camera will be set
to a recording pause.
≥Set to Tape Recording Mode.
3 seconds. After checking, the camera will be set
to a recording pause.
≥Set to Tape Recording Mode.
1
Press the joystick to display the icon during
the recording pause. Move the joystick
down until icon
the recording pause. Move the joystick
down until icon
1 appears.
2
Move the joystick left to select the
recording check icon [
recording check icon [
].
≥The [RECORDING CHECK STARTED]
indication appears on the screen of the movie
camera.
camera.
;
0h00m10s00f
0h00m10s00f
0h00m10s00f
1)
R 0:30
R 0:30
R 0:30
2)
1
LSQT1006ENG.book 22 ページ ２００５年１２月９日 金曜日 午前１１時１７分