Panasonic SDR-SW20P User Manual

62

VQT1M21

  Connect the unit and AC adaptor (P.22), and set the mode dial to a setting 

other than [OFF].

 Connect the unit and printer with the USB cable (supplied).

Insert the plugs as far as they will go.

Select [PictBridge].

Select the still pictures to print.

Number of 
copies (Max. 9)

Set the number of copies.
•  To not print the picture, set “0”.
•  Repeat steps 

 and 

 to select up to 8 still 

pictures for printing. 

●  Do not use any other USB connection cables except the supplied one. 

(Operation is not guaranteed with any other USB cables.)

●  Connect the unit directly to the printer without going through a USB hub.
●  For paper size and print quality, etc., check printer settings.
●  Avoid the following operations during printing. Otherwise, pictures will not print 

correctly:

  • Disconnecting the USB cable
  • Opening the card/battery door
  • Rotating the mode dial
  • Shutting off power

3