Panasonic SDR-SW20P User Manual

65

VQT1M21

 Connect the AC adaptor provided with the DVD burner to the DVD burner.

  Connect the unit and AC adaptor (P.22) and set the mode dial to a position 

other than [OFF].

  Connect this unit and the DVD burner with the mini AB USB connection 

cable.

Insert the plugs as far as they will go.

Mini-A plug

Mini-B plug

 Insert a disc into the DVD burner.

[DVD BURNER] display

•  Once connected, the [DVD BURNER] display 

appears on the LCD monitor of the unit. If it 
does not appear, reconnect the mini AB USB 
connection cable.

•  First connect the DVD burner to the unit, and 

then insert the disc.

Motion pictures and still pictures recorded with this unit can be copied to 
discs using DVD burners (sold separately). 

●  Use the mini AB USB connection cable that comes with the DVD burner (sold 

separately). Operation is not guaranteed with other cables.

●  Connect the unit directly to the printer without going through a USB hub.
●  Ensure without fail that only the AC adaptors designed solely to be used with 

the unit and DVD burner are connected. Power cannot be supplied from the 
unit to the DVD burner using a USB connection. While powered by the battery, 
the unit and DVD burner cannot be connected for use.

●  If the DVD burner is connected to this unit with a disc already inserted, the 

message “CANNOT CHECK CONNECTED DEVICE. DISCONNECT THE 
USB CABLE FROM THIS UNIT.” may be displayed after “Please Wait.” is 
displayed for over a minute. When this happens, disconnect the Mini AB USB 
Connection Cable from the unit and remove the disc from the DVD burner to 
make sure the disc is usable and was not inserted upside down.

●  If “READING DISC...” is displayed on the screen for more than 2 minutes, 

remove the disc from the DVD burner and make sure the disc is usable and 
was not inserted upside down.