Panasonic SDR-S26P User Manual
98
LSQT1488
Others
Cautions for use
≥ The unit and SD card become warm after long
operation, but this is not a malfunction.
Keep the SD Video Camera as far away as
possible from electromagnetic equipment
(such as microwave ovens, TVs, video games
etc.).
≥ If you use the SD Video Camera on top of or
possible from electromagnetic equipment
(such as microwave ovens, TVs, video games
etc.).
≥ If you use the SD Video Camera on top of or
near a TV, the pictures and sound on the SD
Video Camera may be disrupted by
electromagnetic wave radiation.
Video Camera may be disrupted by
electromagnetic wave radiation.
≥ Do not use the SD Video Camera near cell
phones because doing so may result in noise
adversely affecting the pictures and sound.
adversely affecting the pictures and sound.
≥ Recorded data may be damaged, or pictures
may be distorted, by strong magnetic fields
created by speakers or large motors.
created by speakers or large motors.
≥ Electromagnetic wave radiation generated by
microprocessors may adversely affect the SD
Video Camera, disturbing the pictures and
sound.
Video Camera, disturbing the pictures and
sound.
≥ If the SD Video Camera is adversely affected
by electromagnetic equipment and stops
functioning properly, turn the SD Video
Camera off and remove the battery or
disconnect AC adaptor. Then reinsert the
battery or reconnect AC adaptor and turn the
SD Video Camera on.
functioning properly, turn the SD Video
Camera off and remove the battery or
disconnect AC adaptor. Then reinsert the
battery or reconnect AC adaptor and turn the
SD Video Camera on.
Do not use the SD Video Camera near radio
transmitters or high-voltage lines.
≥ If you record near radio transmitters or
transmitters or high-voltage lines.
≥ If you record near radio transmitters or
high-voltage lines, the recorded pictures and
sound may be adversely affected.
sound may be adversely affected.
Make sure to use the supplied cords and
cables. If you use optional accessories, use
the cords and the cables supplied with them.
Do not extend the cords and the cables.
cables. If you use optional accessories, use
the cords and the cables supplied with them.
Do not extend the cords and the cables.
Do not spray insecticides or volatile
chemicals onto the unit.
≥ If the unit is sprayed with such chemicals, its
chemicals onto the unit.
≥ If the unit is sprayed with such chemicals, its
body may be marred and the surface finish
may peel off.
may peel off.
≥ Do not leave rubber or plastic products in
contact with the unit for a long time.
When you use the unit in a sandy or dusty
place such as a beach, do not let sand or fine
dust get into the body and terminals of the
unit.
Also, keep the unit away from sea water.
≥ Sand or dust may damage the unit. (Care
place such as a beach, do not let sand or fine
dust get into the body and terminals of the
unit.
Also, keep the unit away from sea water.
≥ Sand or dust may damage the unit. (Care
should be taken when inserting and removing
an SD card.)
an SD card.)
≥ If sea water splashes onto the unit, wipe off the
water with a well wrung cloth. Then wipe the
unit again with a dry cloth.
unit again with a dry cloth.
When carrying the unit, do not drop or bump
it.
≥ A strong impact can break the unit’s casing,
it.
≥ A strong impact can break the unit’s casing,
causing it to malfunction.
Cleaning
≥ Before cleaning, detach the battery or pull the
≥ Before cleaning, detach the battery or pull the
AC cable from the AC outlet, and then wipe the
unit with a soft, dry cloth.
unit with a soft, dry cloth.
≥ If the unit is very dirty, dip a cloth in water and
squeeze firmly, and then wipe the unit with the
damp cloth. Next, dry the unit with a dry cloth.
damp cloth. Next, dry the unit with a dry cloth.
≥ Use of benzine, paint thinner, alcohol, or
dishwashing liquid may alter the camera body
or peel the surface finish. Do not use these
solvents.
or peel the surface finish. Do not use these
solvents.
≥ When using a chemical dust cloth, follow the
instructions that came with the cloth.
Do not use the unit for surveillance purposes
or other business uses.
≥ This unit was designed for consumer
or other business uses.
≥ This unit was designed for consumer
intermittent use. It was not intended for
continuous use, or for any industrial or
commercial application resulting in prolonged
use.
continuous use, or for any industrial or
commercial application resulting in prolonged
use.
≥ In certain situations, continuous use could
cause the unit to overheat and cause a
malfunction. Such use is strongly discouraged.
malfunction. Such use is strongly discouraged.
About this unit
SDR-S26P_PC-LSQT1488_mst.book 98 ページ ２００９年２月６日 金曜日 午後４時０分