Panasonic NV-GS250GN User Manual

Page of 64
Record mode
21
VQT0N73
Check the recording
The last image recorded is played back for 2 to 
3 seconds. After checking, the camera will be set 
to a recording pause.
Set to Tape Recording Mode.
1
Press the joystick during the recording 
pause until the
 icon 
appears.
2
Move the joystick down to select the 
recording check icon [
].
Blank search function
Searches for the last part of the image recorded 
(unused part of the tape).
Set to Tape Recording/Playback Mode.
1
Set [BASIC] or [ADVANCE] >> 
[BLANK SEARCH] >> [YES].
ª
Stopping blank search midway 
through
Move the joystick down.
≥If the cassette tape has no blank part, then the 
camera will stop at the end of the tape.
≥The camera stops at a point approx. 1 second 
before the end of the last image recorded. 
When you start recording at that point, the 
image can be recorded seamlessly from the last 
image.
Recording still pictures onto a card 
(Photoshot) 
Set to Card Recording Mode.
1
Press the [PHOTO SHOT] button halfway in 
order to adjust focusing. (For auto focusing 
only) 
≥If you set [OIS] to [ON], then the image 
stabilizer function will be more effective. 
(MEGA OIS will be indicated.) 
≥The iris/gain value is fixed and this camera 
focuses on the subject automatically.
1
 Shutter chance mark
± (The white lamp flashes.):
Focusing
¥ (The green lamp lights up.):
When in focus
No mark:
When focusing is unsuccessful
≥The shutter chance mark is indicated as follows 
when the [PHOTO SHOT] button is not pressed 
halfway. Please use it as a guide for recording.
¥ (The green lamp lights up.):
When in focus and a good picture 
can be recorded
± (White lamp lights up.):
Almost in focus
2
Focus area
2
Press the [PHOTO SHOT] button fully.
ª
To record still pictures clearly
≥When zooming in on the subject with a  
magnification of
 4k to 10k or higher, it is 
difficult to reduce the slight shaking from holding 
the movie camera by hand. We recommend 
decreasing the zoom magnification and 
approaching the subject when recording.
≥When recording still pictures, hold the movie 
camera firmly with your hands and keep your 
arms stationary at your side so as not to shake 
the movie camera.
≥You can record stable pictures without shaking 
by using a tripod and the remote control.
1
PC
PHOTO
SHOT
1
2
GS250GN.book  21 ページ  2005年1月26日 水曜日 午後12時17分