Panasonic NV-GS250GN User Manual

Record mode

VQT0N73

This camera will be put into standby in approx. 
1.7 seconds after the power is turned on.
≥This is only activated in the following cases.

≥A tape or a card is inserted, while the Tape 

Recording Mode is set.

≥A card is inserted, while the Card Recording 

Mode is set.

≥The quick start recording lamp lights up. 

(Press the button again to cancel it.) 

≥The quick start is now ready.

Set the [OFF/ON] switch to [ON].
≥This camera will be put into a recording 

pause in approx. 1.7 seconds after it is turned 
on.

ª

Press and hold the [QUICK START] button for 
approx. 2 seconds. The lamp will go off and the 
camera will be completely turned off. 
≥If the standby continues for approx. 30 minutes, 

then the lamp will go off and the camera will be 
completely turned off.

≥When you rotate the mode dial or remove the 

battery, the quick start recording lamp is turned 
off and the quick start mode is cancelled. If the 
movie camera is turned on and the Tape/Card 
Recording Mode is set though, the lamp turns 
on and the quick start mode is restored.

≥When the camera is quick-started with the white 

balance on automatic, it may take some time 
until the white balance is adjusted if the scene 
being recorded has a light source different from 
the scene last recorded. (When the colour night 
view function is used, however, the white 
balance of the scene last recorded is retained.) 

≥The zoom magnification may differ from when it 

is in the quick start standby mode and when the 
recording starts.

≥Since about half the power of normal recording 

is used in quick start standby, using quick start 
reduces the recordable time.

This protects a backlit subject from being 
darkened.
≥Set to Tape/Card Recording Mode.

1 appears.

≥The image on the screen will become 

brighter.

ª

Select the [

] icon again.

≥If you operate the [OFF/ON] switch or the mode 

dial, the backlight compensation is cancelled.

This function allows you to record colour subjects 
in dark locations to stand out against the 
background.
Attach the camera to a tripod, and you can record 
images free from vibration.
≥Only manual focusing can be used.
≥Recorded scene is seen as if frames were 

missed.

Colour night view function
You can record dark locations brightly in colour.
0 Lux night view function
You can record completely dark locations with the 
light of the LCD monitor.
≥Set to Tape Recording Mode.

1 appears.

≥Each upward press switches the modes.

OFF

 # Colour night view function # 0 Lux 

night view function

 # OFF

START

QUICK

ª

1

1

GS250GN.book  24 ページ  ２００５年１月２６日　水曜日　午後１２時１７分