Panasonic NV-GS250GN User Manual

Page of 64
Record mode
30
VQT0N73
ª
To cancel the scene mode function
Set [BASIC] >> [SCENE MODE] >> [OFF] or set 
the [AUTO/MANUAL/FOCUS] switch to [AUTO].
Sports mode
≥For slow-motion playback or playback pause 
of recorded pictures, this mode presents free 
of camera shakes.
≥During normal playback, the image 
movement may not look smooth.
≥Avoid recording under fluorescent light, 
mercury light or sodium light because the 
colour and brightness of the playback image 
may change.
≥If you record a subject illuminated with strong 
light or a highly reflective subject, vertical 
lines of light may appear.
≥If the brightness is insufficient, the sports 
mode does not function. The [
5] indication 
flashes.
≥If this mode is used indoors, the screen may 
flicker.
Portrait mode
≥If this mode is used indoors, the screen may 
flicker. If so, change the scene mode setting 
to [OFF].
Low light mode
≥Extremely dark scenes may not be able to be 
recorded finely.
Spotlight mode
≥If the recording subject is extremely bright, 
the recorded image may become whitish and 
the periphery of the recorded image 
extremely dark.
Surf & snow mode
≥If the recording subject is extremely bright, 
the recorded image may become whitish.
Recording in natural colours 
(White balance) 
The automatic white balance function may not 
reproduce natural colours depending on the 
scenes or lighting conditions. If so, you can adjust 
the white balance manually.
Set to Tape/Card Recording Mode.
1
Set the [AUTO/MANUAL/FOCUS] switch to 
[MANUAL].
2
Move the joystick down until the white 
balance indication appears. ([
] etc.)
3
Move the joystick left or right in order to 
select the white balance mode.
1) Auto white balance adjustment [
]
2) Indoor mode (for recording under 
incandescent lamps) [
]
3) Outdoor mode [
]
4) Manual adjustment mode [
]
ª
To restore to the automatic 
adjustment
Move the joystick left or right until the [
indication appears. Or, set the [AUTO/MANUAL/
FOCUS] switch to [AUTO].
≥When the camera is turned on with the lens cap 
fitted, the automatic white balance adjustment 
may not function properly. Please turn the 
camera on after removing the lens cap.
≥When setting both the white balance and the 
iris/gain, set the white balance first.
≥Whenever recording conditions change, re-set 
the white balance for correct adjustment.
ª
To set the white balance manually
Select [
] in Step 3. Then, while viewing a white 
subject on the entire screen, move the joystick up 
to select the [
] indication.
AUTO
MANUAL
FOCUS
AWB
MNL
AWB
1
1
1
1
1)
3)
2)
4)
AWB
AWB
AWB
GS250GN.book  30 ページ  2005年1月26日 水曜日 午後12時17分