Panasonic NV-GS250GN User Manual

Menu

VQT0N73

ª

Set to [LOWCUT] and this reduces low sound 
noise and wind noise hitting the stereo zoom 
microphone (VW-VMH3E; optional) mounted on 
the smart accessory shoe.

ª

This switches between date and time indications.
≥The movie camera automatically records the 

date and time of picture taking on the tape.

≥You can also show or change the date/time 

indication by repeatedly pressing the 
[DATE/TIME] button on the remote control.

ª

Switches the audio (PCM audio) recording 
systems.
[12bit]: Records audio in “12 bit 32 kHz 4 tracks”. 

(The original audio signals can be kept 
after the other audio signals are dubbed.) 

[16bit]: Records audio in “16 bit 48 kHz 2 tracks”. 

Audio can be recorded in higher quality. 
(If audio signals are dubbed, then the 
original audio signals will be erased.) 

ª

Set to [ON] and this turns the recording lamp on 
during recording, which indicates that recording is 
underway. Set to [OFF] and this does not turn on 
the lamp even when recording is underway.

ª

Set to [ON] and the display mode can be switched 
to all functions. Set to [OFF] and it can be 
switched to minimum display.

ª

Set to [ON] and confirmation/alarm beeps are 
issued as follows.
1 Beep
≥When you start recording
≥When you turn on the power
2 Beeps
≥When you pause recording
2 Beeps for 4 times
≥When a cassette with its erasure prevention tab 

set to [SAVE] is inserted, condensation occurs, 
and at other times. Check the sentence 
displayed on the screen.

ª

[OFF]:

When about 5 minutes passed 
without any operation, the standby 
mode automatically will be set. In 
the standby mode, [

;] blinks and it 

takes time more than usual to start 
recording after you press the 
recording start/stop button.

[5 MINUTES]:When about 5 minutes passed 

without any operation, the movie 
camera automatically turns off to 
protect the tape or to prevent the 
battery from running down. When 
you use the movie camera, turn it 
on again.

≥In the following cases, the power may not turn 

off even when set [POWER SAVE] >> 
[5 MINUTES].

≥When connecting to the AC outlet

(When using the AC adapter)

≥When connecting the USB cable or the DV 

cable to a personal computer or other 
equipment

≥When the PC mode

ª

This switches among the output settings of the 
AV/headphone terminal.
[IN/OUT]: Use this setting when inputting signals 

from other equipment via an AV cable 
or a S-Video cable.

[OUT/

Ë]: Automatically switches between AV 

and headphone output.

[OUT]:

Use this setting when image or sound 
is not output normally to the TV in 
[OUT/

Ë].

≥When using the headphone, set to [SETUP] or 

[BASIC] >> [AV JACK] >> [OUT/

Ë]. If set to 

[OUT], you may hear noises on the right.

ª

Set to [ON] and the settings (shutter speed, iris/
gain values, and white balance settings (

), 

etc.) used during the recordings are displayed 
during playback.
≥When the [AUTO/MANUAL/FOCUS] switch is 

set to [AUTO], the indication [AUTO] will 
appear.

≥When there is no data, [---] appears on the 

display. 

≥If the camera data of the movie camera are 

played back on other equipment, the settings 
information is sometimes not displayed 
normally.

GS250GN.book  47 ページ  ２００５年１月２６日　水曜日　午後１２時１７分