Panasonic NV-GS120GN User Manual
Before Use
-13-
: PC Mode
Use this mode when you want to connect the
Movie Camera to your Personal Computer.
Movie Camera to your Personal Computer.
Using the Viewfinder/LCD Monitor
ª Using the Viewfinder
Before using the Viewfinder, adjust the field of
view so that the displays inside the Viewfinder
become clear and easy to read.
view so that the displays inside the Viewfinder
become clear and easy to read.
1
Tilt up the Viewfinder.
≥The Viewfinder can also be pulled out for use.
≥Do not pull on the Eyecup to extend the
≥Do not pull on the Eyecup to extend the
Viewfinder.
2
Adjust by sliding the Eyepiece Corrector
Knob
Knob
(48)
.
To Use the Viewfinder at the Same Time as the
LCD Monitor
Set [LCD/EVF] >> [EVF ON/AUTO] >> [ON].
≥The Viewfinder does not turn off even if the LCD
LCD Monitor
Set [LCD/EVF] >> [EVF ON/AUTO] >> [ON].
≥The Viewfinder does not turn off even if the LCD
Monitor is opened.
≥When you turn the Movie Camera off, this
setting is cancelled.
ª Using the LCD Monitor
With the LCD Monitor open, you can also record
the picture while watching it.
the picture while watching it.
1
Press the [PUSH OPEN] Button
(2)
and pull
the LCD Monitor
(3)
out in the direction of
the arrow.
≥The Viewfinder is deactivated.
≥The LCD Monitor can be opened a maximum
≥The Viewfinder is deactivated.
≥The LCD Monitor can be opened a maximum
of 120
o. If you open the LCD monitor by 120o,
it becomes convenient to operate menus or to
play back pictures.
play back pictures.
PC
12:30:45
15.10.2004
15.10.2004
12:30:45
15.10.2004
12:30:45
15.10.2004
15.10.2004
12:30:45
15.10.2004
(48)
PUSH
OPEN
(2)
(3)
2
Adjust the LCD Monitor angle according to
the desired recording angle.
≥The LCD Monitor can rotate a maximum of
the desired recording angle.
≥The LCD Monitor can rotate a maximum of
180
o 1 from the vertical position upwards
and a maximum of 90
o 2 to the downward
direction. Forcefully rotating the LCD Monitor
beyond these ranges will damage the Movie
Camera. You cannot rotate the LCD Monitor
when it is opened 120
beyond these ranges will damage the Movie
Camera. You cannot rotate the LCD Monitor
when it is opened 120
o angle. Therefore, do
not rotate it forcibly.
Closing the LCD Monitor
Push the LCD Monitor until it is securely locked.
≥Make sure the Card Slot Cover is closed.
Push the LCD Monitor until it is securely locked.
≥Make sure the Card Slot Cover is closed.
ª Adjusting Brightness and Colour
Level
When [LCD/EVF SET] on the [LCD/EVF]
Sub-Menu is set to [YES], the following items are
displayed.
Sub-Menu is set to [YES], the following items are
displayed.
LCD Brightness [LCD BRIGHTNESS]
Adjusts the brightness of the image on the LCD
screen.
LCD Colour Level [LCD COLOUR LEVEL]
Adjusts the colour saturation of the image on the
LCD screen.
Brightness of the Viewfinder
[EVF BRIGHTNESS]
Adjusts the brightness of the image in the
Viewfinder.
Adjusts the brightness of the image on the LCD
screen.
LCD Colour Level [LCD COLOUR LEVEL]
Adjusts the colour saturation of the image on the
LCD screen.
Brightness of the Viewfinder
[EVF BRIGHTNESS]
Adjusts the brightness of the image in the
Viewfinder.
To Adjust
Press the [
Press the [
;/∫] Button and select the item to be
adjusted, and then press the [
6/5] Button to
raise or lower the number of vertical bars in the
Bar Indication.
≥A larger number of vertical bars indicates
Bar Indication.
≥A larger number of vertical bars indicates
stronger brightness or colour saturation.
290
o
1180
o
1LCD BRIGHTNESS
[-]||||----[+]
[-]||||----[+]
LCD COLOUR LEVEL
[-]||||----[+]
[-]||||----[+]
EVF BRIGHTNESS
[-]||||----[+]
[-]||||----[+]
;/∫:SELECT &/%:SETUP
!/MENU:EXIT
LCD/EVF SETUP
120.200GN.book 13 ページ ２００４年２月２６日 木曜日 午後１２時７分