Panasonic NV-GS35GN User Manual

Page of 56
Record mode
22
LSQT0893
ª
To use the zoom microphone function
Interlocked with the zooming operation, the 
microphone will collect sounds clearly far away 
with the tele-shot or those in the vicinity with the 
wide-angle shot.
Set to Tape Recording Mode.
1
Set [ADVANCE] >> [ZOOM MIC] >> [ON].
ª
About the variable speed zoom 
function
≥When pushing the [W/T] lever as far as it will go, 
you can zoom from 1
k to 30k in 3.5 second 
(24
k in 3.0 second on NV-GS25) at the 
maximum.
≥The zoom speed varies according to the amount 
of movement of the [W/T] lever.
≥The variable speed zoom function cannot be 
used with the remote control.
Recording yourself
You can record yourself while viewing the LCD 
monitor. You can record persons in front of the 
camera while presenting them the image. The 
image is horizontally flipped as if you see a mirror 
image. (The image to be recorded is the same as 
that recording.) 
1
Rotate the LCD monitor towards the lens 
side.
≥When the LCD monitor is opened, the 
viewfinder will be automatically turned off. If the 
LCD monitor is rotated towards the lens side 
though, then the viewfinder will be activated.
≥When the LCD monitor is rotated towards the 
lens side, the icon will not be displayed even if 
you push the centre of the joystick.
Quick start
This camera will be put into standby in approx. 
1.7 seconds (1.3 seconds on NV-GS25) after the 
power is turned on.
≥This is only activated in the following cases.
≥A tape or a card is inserted, while the Tape 
Recording Mode is set.
≥A card is inserted, while the Card Recording 
Mode is set.
1
Press the [QUICK START] button.
≥The quick start recording lamp lights up. 
(Press the button again to cancel it.) 
2
Set the [OFF/ON] switch to [OFF].
≥The quick start is now ready.
3
Set the [OFF/ON] switch to [ON].
≥This camera will be put into a recording 
pause in approx. 1.7 seconds (1.3 seconds 
on NV-GS25) after it is turned on.
ª
To cancel the quick start when the 
power is [OFF]
Press and hold the [QUICK START] button for 
approx. 2 seconds. The lamp will go off and the 
camera will be completely turned off. 
≥If the standby continues for approx. 30 minutes, 
then the lamp will go off and the camera will be 
completely turned off.
≥When you rotate the mode dial or remove the 
battery, the quick start recording lamp is turned 
off and the quick start mode is cancelled. If the 
movie camera is turned on and the Tape/Card 
Recording Mode is set though, the lamp turns 
on and the quick start mode is restored.
≥When the camera is quick-started with the white 
balance on automatic, it may take some time 
until the white balance is adjusted if the scene 
being recorded has a light source different from 
the scene last recorded. (When the colour night 
view function is used, however, the white 
balance of the scene last recorded is retained.) 
ZOOM
START
QUICK
OFF
ON
GS35_25GN.book  22 ページ  2005年1月31日 月曜日 午後3時25分