Panasonic VDR-D200 User Manual
106
LSQT0969
Connection and recognition (Windows)
Wi
th
a c
o
m
p
u
ter
(
V
D
R
-D
2
00
o
n
ly
)
Connection and recognition (Windows)
After the driver and software applications are installed, the unit must be connected to the computer
and be correctly recognized by the computer.
≥ Connect after installing the driver and software applications.
≥ If the supplied CD-ROM is inserted in the computer, remove it. (If the [Setup Menu] is running,
and be correctly recognized by the computer.
≥ Connect after installing the driver and software applications.
≥ If the supplied CD-ROM is inserted in the computer, remove it. (If the [Setup Menu] is running,
wait until it finishes, then remove the CD-ROM.)
≥ If the recognition procedure is not accomplished properly, operation will not be possible after
connecting the unit to the computer.
≥ If the unit fails to operate normally, it may mean that you have not conducted the installation or
recognition procedure properly.
¬Connect this unit to the AC adaptor.
1 Insert a disc or card with recorded images in the unit, then select the
unit’s operation mode.
When using a disc: Select
.
When using a card: Select
.
2
(Only in card playback mode)
Press the MENU button, then select [
SETUP]
#
[
USB FUNCTION]
# [PC CONNECT] and press
the joystick.
≥ Press the MENU button to exit the menu screen.
3 Connect this unit and a computer.
This unit is automatically recognized by the
computer.
computer.
≥ Do not use any other USB cables except the
supplied one. (Operation is not guaranteed with any
other USB cables.)
other USB cables.)
Connection and recognition procedures
A USB cable (supplied)
≥ Insert the plugs as far as they will go. The unit
≥ Insert the plugs as far as they will go. The unit
and computer will not operate properly if the
plugs are not inserted fully.
plugs are not inserted fully.
A
D200(P_PC)eng.book 106 ページ ２００５年１１月２２日 火曜日 午後３時１分