Panasonic VDR-D200 User Manual
93
LSQT0969
W
it
h
othe
r produ
ct
s
With a printer (PictBridge) (VDR-D200 only)
With a printer (PictBridge) (VDR-D200 only)
(SD)
To print pictures by directly connecting this unit to the printer, use a printer compatible with
PictBridge. (Read the operating instructions for the printer.)
PictBridge. (Read the operating instructions for the printer.)
≥ Use the AC adaptor to free you from worrying about the battery running down.
¬Insert an SD card with recorded images in the unit, turn on the unit and then
rotate the mode dial to select
.
1 Press the MENU button, then select [
SETUP]
#
[
USB FUNCTION]
# [PictBridge] and press the
joystick.
≥ Press the MENU button to exit the menu screen.
2 Connect this unit and a printer.
[
] indication appears.
≥ If the [
] indication does not appear or
continues to flash, disconnect and then reconnect
the USB cable or check the printer, SD card and
settings on this unit.
the USB cable or check the printer, SD card and
settings on this unit.
≥ Do not use any other USB cables except the
supplied one. (Operation is not guaranteed with any
other USB cables.)
other USB cables.)
3 Select a file to be printed, then press the joystick.
The number of pictures set is displayed.
4 Move the joystick up or down to select the desired number of prints,
then press the joystick.
≥ You can set up to 9 prints.
≥ To cancel the setting, set the number of prints to [0].
≥ Up to 8 files displayed on a page can be set in succession by repeating steps 3 and 4.
≥ To cancel the setting, set the number of prints to [0].
≥ Up to 8 files displayed on a page can be set in succession by repeating steps 3 and 4.
A USB cable (supplied)
≥ Insert the plugs as far as they will go.
≥ Insert the plugs as far as they will go.
A
D200(P_PC)eng.book 93 ページ ２００５年１１月２２日 火曜日 午後３時１分