Panasonic NV-GS300B User Manual

Menu

LSQT0974

ª

This switches between date and time indications.
≥The Camcorder automatically records the date 

and time the picture was taken on the tape.

≥You can also show or change the date/time 

indication by repeatedly pressing the [DATE/
TIME] button on the remote control.

ª

Switches the audio (PCM audio) recording 
systems.
[12bit]: Records audio in “12 bit 32 kHz 4 tracks”. 

(The original audio signals can be kept 
after the other audio signals are dubbed.) 

[16bit]: Records audio in “16 bit 48 kHz 2 tracks”. 

Audio can be recorded in higher quality. 
(If audio signals are dubbed, then the 
original audio signals will be erased.) 

ª

Set to [ON] and this turns the recording lamp on 
during recording, which indicates that recording is 
underway. Set to [OFF] and this does not turn on 
the lamp even when recording is underway.

ª

Set to [ON] and the display mode can be switched 
to all functions. Set to [OFF] and it can be 
switched to minimum display.

ª

Set to [ON] and confirmation/alarm beeps are 
issued as follows.
1 Beep
≥When you start recording
≥When you turn on the power
≥

When the unit goes from quick start standby 
mode to recording pause

2 Beeps
≥When you pause recording
≥When you turn off the power
≥When the unit goes into quick start standby 

mode 

2 Beeps for 4 times
≥When a cassette with its erasure prevention tab 

set to [SAVE] is inserted, condensation occurs 
(

), and at other times. Check the sentence 

displayed on the screen. (

)

ª

Set to [ON] and the settings (shutter speed, iris/
gain values, and white balance settings (

), 

etc.) used during the recordings are displayed 
during playback.
≥If the [AUTO/MANUAL/FOCUS] switch was set 

to [AUTO] when recording,  [AUTO] appears on 
the display.

≥When there is no data, [---] appears on the 

display. 

≥If data recorded on this unit is played back on 

other equipment (or a tape recorded on other 
equipment is played back on this unit), the 
settings information is sometimes not displayed 
normally.

ª

This switches the sound to be played back.
[STEREO]: Stereo sound (main sound and sub 

sound) 

[L]:

Left channel sound (main sound) 

[R]:

Right channel sound (sub sound) 

ª

If set to [ON], the circumference of the joystick 
lights up in blue during operation.

ª

When there is a menu that cannot be selected 
depending on a combination of functions, set to 
[YES] for changing the menu settings back to the 
initial shipping condition.
(Language setting cannot be back to the initial 
shipping condition.)

ª

If you set to [DEMO MODE] >> [ON] without 
inserting a cassette and a card, the Camcorder is 
automatically set to the demonstration mode for 
introducing its functions. If any button is pressed 
or operated, the demonstration mode is canceled. 
If no operations take place for approx. 10 
minutes, the demonstration mode automatically 
starts. To terminate the demonstration mode, 
insert a cassette or a card, or set to 
[DEMO MODE] >> [OFF]. For normal use, set this 
function to [OFF].

LSQT0974_ENG.book  65 ページ  ２００５年１１月７日　月曜日　午前１１時５８分