Panasonic VDR-D300GN User Manual
W
ith othe
r prod
uc
ts
With a printer (PictBridge)
115
LSQT1025
With a printer (PictBridge)
(SD)
To print pictures by directly connecting this unit to the printer, use a printer compatible with
PictBridge. (Read the operating instructions for the printer.)
PictBridge. (Read the operating instructions for the printer.)
≥ Use the AC adaptor to free you from worrying about the battery running down.
¬Insert an SD card with recorded images in the unit, turn on the unit and then
rotate the mode dial to select
.
1 Press the MENU button, then select [
SETUP]
# [
USB FUNCTION]
# [PictBridge] and press
the joystick.
≥ Press the MENU button to exit the menu screen.
2 Connect this unit and a printer.
The [
] indication appears on this unit’s
screen.
≥ If the [
] indication does not appear or
continues to flash, disconnect and then reconnect the
USB cable or check the printer, SD card and settings on
this unit.
USB cable or check the printer, SD card and settings on
this unit.
≥ Do not use any other USB cables except the supplied
one. (Operation is not guaranteed with any other USB
cables.)
cables.)
3 Select a file to be printed, then press the joystick.
The number of pictures set is displayed.
A USB cable (supplied)
≥ Insert the plugs as far as they will go.
≥ Insert the plugs as far as they will go.
A
LSQT1025(ENG).book 115 ページ ２００６年２月４日 土曜日 午後６時１０分