Panasonic PV-L672 User Manual
34
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com
PUSH
T
O EJECT
CARD
SLO
T
Digital Still Camera
Memory Card* (optional)
Insertion/ Removal
Insertion/ Removal
Before you begin...
• Connect Camcorder to power source.
• Set POWER to OFF.
• Set POWER to OFF.
*Memory Card: MultiMediaCard or SD Memory Card.
Captured images will be stored on the Memory Card.
Be sure to insert the Memory Card before using the Built-in Digital Still Camera.
Listed below are the Memory Cards which can be used with this Camcorder.
Captured images will be stored on the Memory Card.
Be sure to insert the Memory Card before using the Built-in Digital Still Camera.
Listed below are the Memory Cards which can be used with this Camcorder.
1
Slide TAPE EJECT to open door.
2
Fully insert the Memory Card, with the
sloped corner down, into the Card Slot in
the direction of the arrow. (See diagram.)
sloped corner down, into the Card Slot in
the direction of the arrow. (See diagram.)
3
Push in on the inserted Card to eject.
Note:
• If Memory Card is not inserted, “NO CARD”
• If Memory Card is not inserted, “NO CARD”
appears on-screen.
• Do not insert card in wrong direction.
(This would become the basis for trouble.)
• If “CARD ERROR” appears on-screen, see
page 56.
2
1
A write protection switch is located on the SD Memory Card. Sliding the
switch to the “LOCK” position prevents writing on or formatting the card.
switch to the “LOCK” position prevents writing on or formatting the card.
SD Memory Card write protection switch
Write protection switch
LOCK
Memory Card
MultiMediaCard (SanDisk brand)
SD Memory Card (optional) (See page 52.)
Capacity
8 MB, 16 MB
8 MB, 16 MB, 32 MB, 64 MB
06.L672 DSC p34-39
02.2.19, 0:49 PM
34