Panasonic WV-NP244 User Manual

20

Before asking for repairs, check the symptoms with the following table.
Contact your dealer if a problem cannot be solved even after checking and trying the solution
or if the problem is not described below.

• Is AC 24 V or DC 12 V power sup-

ply connect to the power supply

terminal?
→ Confirm the cable is firmly con-

nected.

• Are the PoE device and the net-

work connector on the rear of the

camera connected using a LAN

cable (4-pair)?
→ Confirm the cable is firmly con-

nected.

• Depending on the PoE device, the

power supply will stop when the

demanded power exceeds its total

power limit for all PoE ports.

Refer to the operating instructions

of the PoE device in use.

The power cannot be
turned on.

14