Panasonic NV-GS5B User Manual
12
Using the Menu Screen
To facilitate the selection of a desired function or setup, this Movie Camera
displays various function setups on Menus.
displays various function setups on Menus.
1
Press the [MENU] Button.
≥The Menu corresponding to the Mode selected by using the
[OFF/ON/MODE] Switch
1
is displayed.
≥When the [CAMERA] Lamp is on, the Camera Function Menu is
displayed.
2
≥When the [VCR] Lamp is on, the VCR Function Menu is displayed.
3
≥When the [CARD P.B] Lamp is on, the Card Function Menu is
displayed.
4
(NV-GS4/GS5 only)
2
Turn the [PUSH] Dial to select a desired Sub-Menu.
≥Turn the [PUSH] Dial to display the highlightened item.
3
Press the [PUSH] Dial to display the selected Sub-Menu.
4
Turn the [PUSH] Dial to select the item to be set.
5
Press the [PUSH] Dial to set the selected item to a desired
mode.
mode.
≥With each press of the [PUSH] Dial, the cursor [1] moves to the next
mode. Menu items that cannot be used in combination with the selected
item are displayed in dark blue.
item are displayed in dark blue.
≥While a Menu is displayed, you cannot record or play back. Menus can be
displayed during playback but not during recording. The above operations
can be done using the [MENU] Button, [SET] Button and [ITEM] Button on
the Remote Controller.
can be done using the [MENU] Button, [SET] Button and [ITEM] Button on
the Remote Controller.
(
l 7)
To Exit the Menu Screen
Press the [MENU] Button again.
About the Menu Mode Setting
The setting selected on the Menu will be retained even when the Movie
Camera is turned off. However, if the Battery or AC Adaptor is disconnected
before turning off the Movie Camera, the selected setup may not be retained.
(But, the setups of [EFFECT2]
The setting selected on the Menu will be retained even when the Movie
Camera is turned off. However, if the Battery or AC Adaptor is disconnected
before turning off the Movie Camera, the selected setup may not be retained.
(But, the setups of [EFFECT2]
(
l 24) are not retained.)
≥Menu operation flow is shown in this text by >>.
ª File Selection in the Card Playback Mode
(NV-GS4/GS5 only)
A File Selection Operation may be necessary during Menu Operations. In this
case, carry out the following procedure.
case, carry out the following procedure.
1
1
1
1
Turn the [PUSH] Dial and select a file.
≥The selected file is marked by a frame
5
.
2
2
2
2
Press the [PUSH] Dial to confirm the selection of the file.
≥After the above File Selection Procedure, carry out the various Menu
Operations. (The above procedure will not be repeated in the following
instructions.)
instructions.)
PICTURE
No.25 100-0012
5
2
CAMERA FUNCTIONS
PRESS MENU TO EXIT
1.CAMERA SETUP
2.DIGITAL EFFECT
3.CARD SETUP
2.DIGITAL EFFECT
3.CARD SETUP
5.RECORDING SETUP
6.DISPLAY SETUP
7.OTHER FUNCTIONS
8.DEMO MODE
6.DISPLAY SETUP
7.OTHER FUNCTIONS
8.DEMO MODE
PRESS MENU TO EXIT
2.DIGITAL EFFECT
3.CARD SETUP
4.RECORDING SETUP
5.AV IN/OUT SETUP
6.DISPLAY SETUP
7.OTHER FUNCTIONS
3.CARD SETUP
4.RECORDING SETUP
5.AV IN/OUT SETUP
6.DISPLAY SETUP
7.OTHER FUNCTIONS
1.PLAYBACK FUNCTIONS
CARD FUNCTIONS
PRESS MENU TO EXIT
1.ERASE CARD FILE
2.CARD EDITING
3.DISPLAY SETUP
2.CARD EDITING
3.DISPLAY SETUP
4.OTHER FUNCTIONS
VCR FUNCTIONS
3
4
4.MULTI-PICTURES
1
M ENU
1
2, 3, 4, 5
M ENU
1, 2
OF
F O
N MODE
B.book 12 ページ ２００２年１月２８日 月曜日 午後３時４８分