Panasonic NV-GS75EB User Manual

Others

VQT0N57

:

1024 or more, less than 1280

:

800 or more, less than 1024

:

640 or more, less than 800 (The 
size is not displayed at under 
640 pixels.) 

If any one of the following indications lights up or 
flashes, please check the movie camera.
Confirmatory indications
Y: A cassette with the accidental erasure 

prevention slider placed in the [SAVE] 
position is inserted.
No cassette is inserted.

[--]/

0:

The built-in battery is low. 

°: The warning/alarm indication appears when 

you record yourself. Turn the LCD monitor 
towards the viewfinder and check the 
warning/alarm indication.

: No card is inserted.

REMOTE : 

An incorrect remote control mode has been 
selected. 

2END: 

The tape came to the end during recording.

::  The video heads are dirty. 

Textual indications
3DEW DETECT/3EJECT TAPE:

Condensation has occurred. Take out the 
cassette and wait for a while. It takes some 
time until the cassette holder opens, but this 
is not a malfunction. 

LOW BATTERY: 

The battery is low. Recharge it. 

NO TAPE : 

No tape is inserted. 

TAPE END: 

The tape came to the end during recording.

CHECK REC TAB: 

You are attempting to record pictures on a 
tape with the accidental erasure prevention 
slider placed in the [SAVE] position. 
You are attempting audio dubbing or digital 
dubbing on a tape with the accidental 
erasure prevention slider placed in the 
[SAVE] position. 

CHECK REMOTE MODE:

An incorrect remote control mode has been 
selected. This is only displayed at the first 
operation of the remote control after 
powering-on. 

WRONG TAPE FORMAT: 

You are attempting to play back a tape 

section that has been recorded with a 
different TV system. This cassette is 
incompatible.

UNPLAYABLE CARD: 

You are attempting to play back data not 
compatible with this movie camera.

UNABLE TO A.DUB (LP RECORDED): 

Audio dubbing cannot be performed 
because the original recording was in LP 
mode.

UNABLE TO A.DUB:

You are attempting to perform audio 
dubbing on a non-recorded tape.

COPY PROTECTED: 

Images cannot be recorded correctly 
because the medium is protected by a copy 
guard.

CARD ERROR: 

This card is not compatible with this movie 
camera.
You are attempting to format a failed card.
It displays, when you attempt to insert the 
incompatible card to Card Slot.

NO CARD: 

No card is inserted.

CARD FULL: 

Card does not have sufficient memory 
remaining. 
Select Picture Playback Mode and delete 
unnecessary files.

NO DATA: 

There are not any recorded files on the 
card.

FILE LOCKED: 

You are attempting to erase protected files.

CARD LOCKED: 

The write protection switch on the SD 
Memory Card is set to [LOCK].

NEED HEAD CLEANING: 

The video heads are dirty. 

PUSH THE RESET SWITCH: 

An irregularity in the equipment has been 
detected. Press the [RESET] button (

). 

This may solve the problem.

CHANGE MODE TO USE USB: 

The USB cable is connected to the movie 
camera in Card Recording Mode.

DISCONNECT USB CABLE: 

You are attempting to turn the mode dial in 
PC mode with the USB cable connected to 
the movie camera. You are attempting to 
record pictures on a tape/card with the USB 
cable connected to the movie camera.

NO INK IN PRINTER: 

There is no ink. Check the connected 
printer.

XGA

SVGA

640

GS75EB.book  45 ページ  ２００４年１２月２０日　月曜日　午後２時５６分