Panasonic NV-GS75EB User Manual
Before using
9
VQT0N57
Using the viewfinder
ª
Extending the viewfinder
1
Pull out the viewfinder and extend it by
pinching the extension knob.
pinching the extension knob.
ª
Adjusting the field of view
1
Adjust the focus by sliding the eyepiece
corrector knob.
corrector knob.
≥You can adjust the brightness of the viewfinder
from the menu.
Power supply
ª
Charging the battery
When this product is purchased, the battery is not
charged. Charge the battery before using this
product.
≥Battery charging time (
charged. Charge the battery before using this
product.
≥Battery charging time (
-10-
)
≥We recommend using Panasonic batteries.
≥If you use other batteries, we cannot guarantee
≥If you use other batteries, we cannot guarantee
the quality of this product.
≥If the DC input lead is connected to the AC
adaptor, then the battery will not get charged.
Remove the DC input lead from the AC adaptor.
Remove the DC input lead from the AC adaptor.
1
Connect the AC mains lead to the AC
adaptor and the AC mains socket.
adaptor and the AC mains socket.
2
Put the battery on the battery mount by
aligning the mark, and then securely plug it
in.
aligning the mark, and then securely plug it
in.
ª
Charging lamp
Lights up: Charging
Goes off: Charging completed
Flashing: The battery is over discharged
Goes off: Charging completed
Flashing: The battery is over discharged
(discharged excessively). In a while,
the lamp will light up and normal
charging will start.
When the battery temperature is
excessively high or low, the [CHARGE]
lamp flashes and the charging time will
be longer than normal.
the lamp will light up and normal
charging will start.
When the battery temperature is
excessively high or low, the [CHARGE]
lamp flashes and the charging time will
be longer than normal.
ª
Connecting to the AC outlet
1
Connect the AC mains lead to the AC
adaptor and the AC mains socket.
adaptor and the AC mains socket.
2
Connect the DC input lead to the AC
adaptor.
adaptor.
3
Connect the DC input lead to this product.
≥The output plug of the AC mains lead is not
≥The output plug of the AC mains lead is not
completely connected to the AC adaptor
socket. As shown in
socket. As shown in
1, there is a gap.
≥Do not use the power cord for other
equipment since the power cord is exclusively
designed for the movie camera. Or do not use
the power cord of other equipment for the
movie camera.
designed for the movie camera. Or do not use
the power cord of other equipment for the
movie camera.
ª
Fitting the battery
Push the battery against the battery holder and
slide it until it clicks.
slide it until it clicks.
12:30:45
12:30:45
12:30:45
1.4. 2005
1.4. 2005
1.4. 2005
12:30:45
1.4. 2005
1.4. 2005
1
GS75EB.book 9 ページ ２００４年１２月２０日 月曜日 午後２時５６分