Panasonic VQT3R48 User Manual
- 13 -
Preparation
Attaching the Lens Hood
In bright sunlight or backlight, the lens hood will minimize lens flare and ghosting. The lens
hood cuts off excess lighting and improves the picture quality.
•
hood cuts off excess lighting and improves the picture quality.
•
Check that the camera is turned off.
•
Close the flash.
Insert the lens hood into the lens with the short
side aligned with the bottom of the main unit.
side aligned with the bottom of the main unit.
•
Do not hold the lens hood in a way that twists or bends it.
Rotate the lens hood in the direction of the arrow.
You will feel some stiffness just before the mark,
but continue to rotate the lens hood to
but continue to rotate the lens hood to
A where
the marks align.
(The lens hood will stop with a “click”.)
(The lens hood will stop with a “click”.)
•
Check that the lens hood is firmly attached and that it does not
appear in the picture.
appear in the picture.
Note
•
When taking pictures with flash with the lens hood attached, the lower portion of the photo may
turn dark (vignetting effect) and the control of the flash may be disabled because the photo
flash may be obscured by the lens hood. We recommend detaching the lens hood.
turn dark (vignetting effect) and the control of the flash may be disabled because the photo
flash may be obscured by the lens hood. We recommend detaching the lens hood.
•
When temporarily detaching and carrying the lens hood, attach the lens
hood to the lens in the reverse direction.
hood to the lens in the reverse direction.