Panasonic VQT3R48 User Manual
Others
- 166 -
The AC Adaptor (optional) can only be used with the designated Panasonic DC
coupler (optional). The AC adaptor (optional) cannot be used by itself.
coupler (optional). The AC adaptor (optional) cannot be used by itself.
Preparations:
Turn the power switch to [OFF] and confirm that the lens barrel is retracted.
Turn the power switch to [OFF] and confirm that the lens barrel is retracted.
A Card/battery door
B DC coupler
C DC coupler cover
D AC adaptor
E AC cable
B DC coupler
C DC coupler cover
D AC adaptor
E AC cable
1
Pull open the card/battery door and the DC
coupler cover.
coupler cover.
2
Insert the DC coupler into this unit.
•
•
Insert by pushing the center of the DC coupler.
•
Press on the DC coupler until it is locked by lever
1.
3
Pull out the cable through the opening as shown
in the illustration and then close the card/battery
door.
•
in the illustration and then close the card/battery
door.
•
Be careful not to catch the cable when closing the card/
battery door.
battery door.
4
Plug the AC adaptor into an electrical outlet.
5
Connect the AC adaptor to the [DC IN] socket of
the DC coupler.
the DC coupler.
Note
•
Always use a genuine Panasonic AC adaptor (optional).
•
When using an AC adaptor, use the AC cable supplied with the AC adaptor.
•
If the AC adaptor and DC coupler are not necessary, then remove them from the digital
camera. Also, please keep the DC coupler cover closed.
camera. Also, please keep the DC coupler cover closed.
•
Also read the operating instructions for the AC adaptor and DC coupler.
AC adaptor (optional)/DC coupler (optional)