Panasonic VQT3R48 User Manual

Page of 189
- 75 -
Recording
Applicable modes: 
Taking Pictures Using Auto Bracket
In this mode, 3 pictures are automatically recorded in the selected exposure 
compensation range each time the shutter button is pressed.
With Auto Bracket 
d1 EV
Note
When Auto Bracket is set, [
] is displayed on the screen.
When taking pictures using Auto Bracket after setting the exposure compensation range, the 
pictures taken are based on the selected exposure compensation range.
When the exposure is compensated, the exposure compensation value appears on the lower 
left of the screen.
The exposure may not be compensated with Auto Bracket depending on the brightness of the 
subject.
In Shutter-Priority AE and Manual Exposure, if the shutter speed is set to more than 1 second, 
Auto Bracket is canceled.
[Œ] is set for the flash when Auto Bracket is set.
You cannot use the Auto Bracket in following conditions.
In [PIN HOLE], [FILM GRAIN] and [MINIATURE EFFECT] in Creative Control Mode
In [HANDHELD NITE SHOT] in [NIGHT PORTRAIT]
In [PANORAMA ASSIST], [HI-SPEED BURST], [FLASH BURST], [STARRY SKY], 
[PHOTO FRAME] and [3D PHOTO MODE] in Scene Mode
When recording motion pictures
 
1st picture
 
2nd picture
 
3rd picture
d0 EV
j1 EV
i1 EV
Press 
3 [È] several times until [AUTO BRACKET] 
appears.
Press 
2/1 to set the compensation range of the 
exposure and then press [MENU/SET].
When you do not use Auto Bracket, select [OFF] (0).