Panasonic NV-GS60GN User Manual

Page of 48
Record mode
20
LSQT1174
Blank search function
Searches for the last part of the image recorded 
(unused part of the tape). After the search is 
finished, the blank search function is cancelled 
and the camera is put into recording pause.
Set to Tape Recording Mode.
1
Press the joystick to display the icon during 
the recording pause. Move the joystick 
down until icon 
1 appears.
2
Move the joystick right to select the blank 
search icon [
].
3
When the confirmation message appears, 
select [YES] and press the centre of the 
joystick.
ª
Stopping blank search midway 
through
Move the joystick down to select the [
∫] icon.
≥If the cassette tape has no blank part, then the 
camera will stop at the end of the tape.
≥The camera stops at a point approx. 1 second 
before the end of the last image recorded. 
When you start recording at that point, the 
image can be recorded seamlessly from the last 
image.
Recording a still picture on a tape 
(Photoshot)
Still pictures can be recorded from the movie 
camera lens.
Set to Tape Recording Mode.
1
Press the [
] button in the recording 
pause mode.
≥The movie camera records a still picture for 
about 7 seconds and then switches back to 
the recording pause mode.
≥If you set [ADVANCED] >> [SHTR EFFECT] >> 
[ON], you can add image and a sound like 
releasing the shutter.
≥Photoshot recording results in slightly inferior 
image quality.
ª
Continuous photoshot
If you set [ADVANCED] >> [SHTR EFFECT] >> 
[ON] and keep the [
] button pressed, the 
movie camera will continuously record still 
pictures in approx. 0.7 seconds intervals until the 
button is released.
≥The screen blinks and, at the same time, a 
shutter clicking sound is recorded.
1
LSQT1174ENG.book  20 ページ  2007年1月29日 月曜日 午後1時28分