Panasonic NV-GS60GN User Manual
Record mode
27
LSQT1174
ª
To restore to the automatic
adjustment
adjustment
Move the joystick left or right until the [
]
indication appears. Or, set the [AUTO/MANUAL/
FOCUS] switch to [AUTO].
FOCUS] switch to [AUTO].
≥When the camera is turned on with the lens cap
fitted, the automatic white balance adjustment
may not function properly. Please turn the
camera on after removing the lens cap.
may not function properly. Please turn the
camera on after removing the lens cap.
≥When setting both the white balance and the
iris/gain, set the white balance first.
≥Whenever recording conditions change, re-set
the white balance for correct adjustment.
ª
To set the white balance manually
Select [
] in Step 3. Then, while viewing a white
subject on the entire screen, move the joystick up
to select the [
to select the [
] indication.
ª
About flashing of the [
] indication
When the manual adjustment mode is
selected
≥Flashing indicates that the white balance
selected
≥Flashing indicates that the white balance
previously adjusted is stored. This setting is
stored until the white balance is adjusted again.
stored until the white balance is adjusted again.
When white balance cannot be set in the
manual adjustment mode
≥White balance may not be adjusted properly in
manual adjustment mode
≥White balance may not be adjusted properly in
the manual adjustment mode in dark places. If
so, use the auto white balance mode.
so, use the auto white balance mode.
During setting in the manual adjustment mode
≥When the setting is completed, it will keep lit.
ª
≥When the setting is completed, it will keep lit.
ª
About the white balance sensor
The white balance sensor detects the type of light
source during recording.
≥Do not cover the white balance sensor during
source during recording.
≥Do not cover the white balance sensor during
recording, or it may not function properly.
Manual focus adjustment
If auto focusing is difficult due to the conditions,
then manual focusing is available.
≥Set to Tape Recording Mode.
then manual focusing is available.
≥Set to Tape Recording Mode.
1
Set the [AUTO/MANUAL/FOCUS] switch to
[MANUAL].
[MANUAL].
2
Set the [AUTO/MANUAL/FOCUS] switch to
[FOCUS].
[FOCUS].
≥The [
] indication and the manual focus
[MF] indication is displayed.
3
Move the joystick left or right in order to
adjust the focus.
adjust the focus.
≥When focused with a wide angle, the subject
may not be in focus when zoomed in. First,
zoom in on the subject, and then focus on it.
zoom in on the subject, and then focus on it.
ª
To restore to the automatic
adjustment
adjustment
Set the [AUTO/MANUAL/FOCUS] switch to
[AUTO] or [FOCUS].
[AUTO] or [FOCUS].
AWB
AUTO
MANUAL
FOCUS
AUTO
MANUAL
FOCUS
MF
MF
MF
MNL
MNL
MF
MF
MF
MNL
LSQT1174ENG.book 27 ページ ２００７年１月２９日 月曜日 午後１時２８分