Panasonic NV-GS60GN User Manual

Page of 48
Playback mode
30
LSQT1174
Frame-by-frame playback
Set to Tape Playback Mode.
1
During playback, move the joystick up to 
select the [
1/;] icon to pause playback.
2
Push the [
sVOLUMEr] lever.
Towards [T]: normal direction
Towards [W]: reversed direction
≥If you keep pushing the lever, then the images 
will continuously be played back frame by 
frame.
≥The pause icon appears for an instant. 
Continuous frame-by-frame playback will start 
after the pause icon disappears.
ª
To return to normal playback
Move the joystick up to select the [
1/;] icon to 
start playback.
Playback on TV
Images recorded by this camera can be played 
back on a TV.
Insert a recorded tape into this camera.
≥Be sure that the power of the unit is turned off 
before connecting it to a TV.
1
Connect the movie camera and a TV.
≥Connect the movie camera and a TV by using 
the AV cable 
1.
2
Turn on this camera and set the mode dial 
to the Tape Playback Mode.
3
Select the input channel on the TV.
4
Move the joystick up to select the [
1/;
icon to start playback.
≥The image and audio are output on the TV.
5
Move the joystick down to select the [
icon to stop playback.
≥Use the AC adaptor to free you from worrying 
about the battery running down.
ª
If the image or audio from this camera 
is not output on the TV
≥Check that the plugs are inserted as far as they 
go.
≥Check the [12bit AUDIO] settings. (
-37-
)
≥Check the connected terminal.
Check the TV’s input setting (input switch). 
(For more information, please read the 
operating instructions for the TV.) 
VOLUME
W
T
1
[VIDEO IN]
[AUDIO IN]
A/V
LSQT1174ENG.book  30 ページ  2007年1月29日 月曜日 午後1時28分