Panasonic NV-GS90 User Manual
Record mode
21
LSQT1291
Recording on a tape
When recording, open the lens cover before
turning the unit on. (
turning the unit on. (
-9-
) If the unit is turned on
with the lens cover closed, the automatic
white balance adjustment (
white balance adjustment (
-49-
) may not
function properly.
When this unit is purchased, the aspect ratio is
set to [16:9] for recording images compatible with
a wide-screen TV. To make this unit compatible
with regular TVs (4:3), change the
[REC ASPECT] setting before recording the
images (
When this unit is purchased, the aspect ratio is
set to [16:9] for recording images compatible with
a wide-screen TV. To make this unit compatible
with regular TVs (4:3), change the
[REC ASPECT] setting before recording the
images (
-27-
) or change the [TV ASPECT] setting
when watching them on the connected TV (
-33-
).
≥Set to Tape Recording Mode.
1
Press the recording start/stop button to
start recording.
start recording.
2
Press the recording start/stop button again
to pause recording.
to pause recording.
≥For the recording time on a tape, refer to
-11-
.
≥Carry out a recording check to verify that the
image is recorded properly.
≥In order to find the unrecorded section, carry out
the blank search (
-22-
).
ª
On-screen display in the tape
recording mode
recording mode
1) Recording time elapse
2) Remaining tape indication
2) Remaining tape indication
ª
Concerning the remaining tape time
indication on the screen
indication on the screen
≥The remaining tape time is indicated in minutes.
(When it reaches less than 3 minutes, the
indication starts flashing.)
indication starts flashing.)
≥During a 15 seconds or shorter recording, the
remaining tape time indication may not be
displayed or the remaining tape time may not be
displayed correctly.
displayed or the remaining tape time may not be
displayed correctly.
≥In some cases, the remaining tape time
indication may display remaining tape time that
is 2 to 3 minutes shorter than the actual
remaining tape time.
is 2 to 3 minutes shorter than the actual
remaining tape time.
Recording check
The last image recorded is played back for 2 to
3 seconds. After checking, the camera will be set
to a recording pause.
≥Set to Tape Recording Mode.
3 seconds. After checking, the camera will be set
to a recording pause.
≥Set to Tape Recording Mode.
1
Press the joystick to display the icon during
the recording pause. Move the joystick
down until icon
the recording pause. Move the joystick
down until icon
1 appears.
2
Move the joystick left to select the
recording check icon [
recording check icon [
].
≥The [RECORDING CHECK STARTED]
indication appears on the screen of the movie
camera.
camera.
;
;
0h00m10s00f
0h00m10s00f
0h00m10s00f
1)
R 0:30
R 0:30
R 0:30
2)
R 0:30
R 0:30
R 0:30
0h00m10s00f
0h00m10s00f
0h00m10s00f
1
LSQT1291_ENG.book 21 ページ ２００８年３月５日 水曜日 午前９時４１分