Panasonic PV-DV953 User Manual
62
To disconnect USB cable safely
If USB cable is disconnected while computer is on, error dialog may appear.
In such case click [OK] and close the dialog box. By following the steps below
you can disconnect the cable safely.
In such case click [OK] and close the dialog box. By following the steps below
you can disconnect the cable safely.
1
Double click the
icon in task tray.
≥Hardware disconnect dialog appears.
2
Select [Panasonic DVC USB-SERIAL Driver]
1
and click
[Stop].
3
Verify [Panasonic DVC USB-SERIAL Driver] is selected and
click [OK].
click [OK].
≥Click [OK], and you can safely disconnect the cable.
Note on the driver name
1
displayed
The driver name displayed will differ depending on your OS, operating
environment and the mode of the Palmcorder.
environment and the mode of the Palmcorder.
Windows XP/2000:
(When the Palmcorder is in VCR mode or Camera Mode:)
[Panasonic DVC USB-SERIAL Driver (COM 4)] (The numeral after “COM” will
differ depending on the operating environment of your personal computer.)
(When the Palmcorder is in Card Playback Mode:)
[Panasonic DVC USB Driver] or [Panasonic DV DISK Port Driver]
(When the Palmcorder is in VCR mode or Camera Mode:)
[Panasonic DVC USB-SERIAL Driver (COM 4)] (The numeral after “COM” will
differ depending on the operating environment of your personal computer.)
(When the Palmcorder is in Card Playback Mode:)
[Panasonic DVC USB Driver] or [Panasonic DV DISK Port Driver]
Windows Me:
[Panasonic DVC Port Driver Version 2.0]
[Panasonic DVC Port Driver Version 2.0]
≥Some OS, such as Windows 98SE, may not show the icon indicating that
you may safely disconnect in task tray. (OS may be set not to show) Make
sure Palmcorder’s [ACCESS] lamp is off and disconnect the cable.
sure Palmcorder’s [ACCESS] lamp is off and disconnect the cable.
.........................................................................................................................
CAUTION:
If you disconnect the USB Cable while the [ACCESS] Lamp is on, it may
damage the Card data.
damage the Card data.
.........................................................................................................................
~~~~~~~~~~~~~~~~~~~~~~~~
If you no longer need software or driver
(Uninstall)
(Uninstall)
The screens may vary with the type of the OS. (In this manual, explanation is
offered with Windows Me screen.)
offered with Windows Me screen.)
1
Select [Start] (>> [Settings]) >> [Control Panel], select the
software or the driver from [Add/Remove Programs] to
uninstall.
software or the driver from [Add/Remove Programs] to
uninstall.
≥Uninstalling steps may vary depending on the OS. Please refer to the user
manual of your OS.
≥If you install the USB Driver while the USB Connecting Cable is being
connected, or if you don’t follow these Operating Instructions, the
Palmcorder will not be recognized correctly. In this case, delete the USB
Driver from [Device Manager] as described below, uninstall the USB Driver,
and re-install it.
Palmcorder will not be recognized correctly. In this case, delete the USB
Driver from [Device Manager] as described below, uninstall the USB Driver,
and re-install it.
1
Set the Palmcorder to VCR Mode or Camera Mode, connect it to the
personal computer, and delete [Panasonic DVC USB-SERIAL Driver
(COM X)] (or [Panasonic Serial USB Driver]) from [Device Manager].
personal computer, and delete [Panasonic DVC USB-SERIAL Driver
(COM X)] (or [Panasonic Serial USB Driver]) from [Device Manager].
2
Set the Palmcorder to Card Playback Mode and delete [Panasonic DVC
USB Driver] (or [Panasonic DVC USB Driver Version 2.0]) (If you use
Windows Me/98SE, also delete [Panasonic DVC Port Driver Version
2.0]).
USB Driver] (or [Panasonic DVC USB Driver Version 2.0]) (If you use
Windows Me/98SE, also delete [Panasonic DVC Port Driver Version
2.0]).
1
2
3
1
1
PV-DV953P.book 62 ページ ２００３年１月１６日 木曜日 午後６時５４分