Panasonic PV-DV953 User Manual
67
DISCONNECT USB CABLE:
You are pressing the Recording
Start/Stop Button, the
[PHOTO SHOT] Button or the
[TITLE] Button in the WEB
CAMERA Mode. You are pressing
the [TITLE] Button in Camera Mode
or VCR Mode with a USB Cable
connected. You are attempting to
record on a Card with a USB Cable
connected.
Start/Stop Button, the
[PHOTO SHOT] Button or the
[TITLE] Button in the WEB
CAMERA Mode. You are pressing
the [TITLE] Button in Camera Mode
or VCR Mode with a USB Cable
connected. You are attempting to
record on a Card with a USB Cable
connected.
CANCEL WEB CAMERA MODE:
It is not possible to operate the
[OFF/ON/MODE] Switch in the WEB
CAMERA Mode.
[OFF/ON/MODE] Switch in the WEB
CAMERA Mode.
~~~~~~~~~~~~~~~~~~~
Notes & Precautions
ª Alarm Sounds
(
l 20)
When [BEEP SOUND] on the [OTHER FUNCTIONS]
Sub-Menu on the [CAMERA FUNCTIONS] Main-Menu is set
to [ON], confirmation/alarm beeps are issued as follows.
1 Beep
≥When you start recording
≥When you switch the [OFF/ON/MODE] Switch from [OFF]
Sub-Menu on the [CAMERA FUNCTIONS] Main-Menu is set
to [ON], confirmation/alarm beeps are issued as follows.
1 Beep
≥When you start recording
≥When you switch the [OFF/ON/MODE] Switch from [OFF]
to [ON]
2 Beeps
≥When you pause recording
2 Beeps for 4 times
≥If you perform a wrong operation before or during recording
≥When you pause recording
2 Beeps for 4 times
≥If you perform a wrong operation before or during recording
ª Progressive PhotoShot
TM
Function
(
l 25)
≥The still pictures are recorded at a slightly rewound point
from where you press the [PHOTO SHOT] Button.
≥When you change to the still picture Mode, you will hear a
click. This is the sound of the iris closing and not an
indication of malfunction.
indication of malfunction.
≥If you record still pictures in Progressive PhotoShot
TM
Mode when your Palmcorder is set to Program AE, the
brightness of the images may vary.
brightness of the images may vary.
≥The picture may be blurred when recording a scene with
many horizontal lines or fine patterns.
≥Using the MagicPix Function or the 1.5 Times Tele Jump
Zoom Function cancels the Progressive PhotoShot
TM
Function.
≥The [
æ] Indication flashes and you cannot use the
Progressive Photoshot Function when [FLASH] is set to
[OFF] and [PROGRESSIVE] is set to [AUTO] and the
surrounding luminousity is not enough.
[OFF] and [PROGRESSIVE] is set to [AUTO] and the
surrounding luminousity is not enough.
≥The [
æ] Indication may flash if the iris is adjusted manually
to the Gain-up value (that is [OPEN 0dB] to [18dB]), when
[PROGRESSIVE] is set to [AUTO].
[PROGRESSIVE] is set to [AUTO].
About [PROGRESSIVE] Setting
≥When the [
≥When the [
æ] Indication is displayed, you can use the
Progressive PhotoShot
TM
Function.
When [PROGRESSIVE] is set to [ON]:
You can use the Progressive PhotoShot
You can use the Progressive PhotoShot
TM
Function at any
time. In this case, however, the following functions are
disabled.
≥[EFFECT1] Digital Effect Modes
≥Digital Zoom [D.ZOOM]
≥1/750 or faster shutter speed
≥Continuous PhotoShot Function
≥When the [REC MODE] is set to [FRAME]
≥When the [ASPECT] is set to [16:9]
disabled.
≥[EFFECT1] Digital Effect Modes
≥Digital Zoom [D.ZOOM]
≥1/750 or faster shutter speed
≥Continuous PhotoShot Function
≥When the [REC MODE] is set to [FRAME]
≥When the [ASPECT] is set to [16:9]
When [PROGRESSIVE] is set to [AUTO]
You cannot use the Progressive PhotoShot Function in the
following circumstances.
≥When the zoom magnification is approximately 10t or
You cannot use the Progressive PhotoShot Function in the
following circumstances.
≥When the zoom magnification is approximately 10t or
higher
≥When the shutter speed is 1/750 or faster
≥When [EFFECT1] is set to [WIPE], [MIX], [STROBE],
≥When [EFFECT1] is set to [WIPE], [MIX], [STROBE],
[GAIN UP], [TRAIL], [MOSAIC], [MIRROR]
≥When the pictures are displayed on a Multi screen
≥Continuous PhotoShot Function
≥When the [REC MODE] is set to [FRAME]
≥When the [ASPECT] is set to [16:9]
≥Continuous PhotoShot Function
≥When the [REC MODE] is set to [FRAME]
≥When the [ASPECT] is set to [16:9]
ª Zoom In/Out Functions
(
l 26)
≥By pressing the [W/T] zoom lever to [W] or to [T] in
Recording Pause Mode, you can zoom 1-10
k at the
maximum speed of 0.3 seconds.
≥During recording, you can zoom 1-10k in as short a time
as approximately 0.8 seconds.
≥During considerably fast zooming, the image may become
out of focus temporarily.
≥When you are using a high amount of zoom, a sharper
focus is achieved if the recording subject is approximately
4 feet (1.2 m) or more away from the Palmcorder.
4 feet (1.2 m) or more away from the Palmcorder.
≥It does not work with an external microphone.
ª Cinema Function and Wide Function
(
l 28)
≥Using the Cinema Function or Wide Function does not
widen the recording angle.
≥If you play back tape recorded in Cinema Mode or Wide
Function on a wide-screen (16:9) format TV, playback size
is automatically adjusted to fit the TV screen format. Please
refer to the TV’s operating instructions for details.
is automatically adjusted to fit the TV screen format. Please
refer to the TV’s operating instructions for details.
≥When images are displayed on a TV screen, the Date/Time
Indication may be erased in some cases.
≥Depending on the TV, the picture quality may be
deteriorated.
≥The Cinema Mode is cancelled when a Title is displayed.
≥The Cinema Mode and Wide Mode cannot be set at the
≥The Cinema Mode and Wide Mode cannot be set at the
same time.
≥It is not possible to record pictures onto a Card in the
Cinema Mode and Wide Mode.
≥It is recommended not to set the [ASPECT] to [16:9] when
using the regular 4:3 formatted TV. (The picture will be
displayed stretched vertically.)
displayed stretched vertically.)
≥Using the Cinema Mode deactivates [MULTI] and [P-IN-P]
of [EFFECT1].
≥Depending on the software in use, the imported Cinema
picture may not be displayed correctly.
PV-DV953P.book 67 ページ ２００３年１月１６日 木曜日 午後６時５４分