Panasonic PV-GS150 User Manual
Record mode
28
LSQT0861
Recording on a tape
≥Open the lens cover. (
(When the Camcorder is turned on with the lens
cover closed, the automatic white balance
adjustment may not function properly. Please
turn the Camcorder on after opening the lens
cover.)
cover closed, the automatic white balance
adjustment may not function properly. Please
turn the Camcorder on after opening the lens
cover.)
≥Set to Tape Recording Mode.
1
Press the recording start/stop button to
start recording.
start recording.
2
Press the recording start/stop button again
to pause recording.
to pause recording.
≥For details on the recording time on a tape, refer
to
≥Carry out a recording check (
) to verify that
the image is recorded properly.
≥In order to find the unrecorded section, carry out
the blank search (
) .
ª
On-screen display in the tape
recording mode
recording mode
¢These indications are displayed only when the
card is inserted.
1) Recording time elapsed
2) Remaining tape indication
3) Still picture size
2) Remaining tape indication
3) Still picture size
4) Number of recordable still pictures
(When no picture can be recorded, this
indication will flash in red.)
indication will flash in red.)
5) Quality of still pictures
ª
Concerning the remaining tape time
indication on the screen
indication on the screen
≥The remaining tape time is indicated in minutes.
(When it reaches less than 3 minutes, the
indication starts flashing.)
indication starts flashing.)
≥During a 15-second or shorter recording, the
remaining tape time indication may not be
displayed or the remaining tape time may not be
displayed correctly.
displayed or the remaining tape time may not be
displayed correctly.
≥In some cases, the remaining tape time
indication may display remaining tape time that
is 2 to 3 minutes shorter than the actual
remaining tape time.
is 2 to 3 minutes shorter than the actual
remaining tape time.
ª
[POWER SAVE]
[OFF]:
When 5 minutes passes without
any operation, the standby mode
will be automatically set. In the
standby mode, [
any operation, the standby mode
will be automatically set. In the
standby mode, [
;] blinks and it
takes more time than usual to start
recording after you press the
recording start/stop button.
recording after you press the
recording start/stop button.
[5 MINUTES]: When 5 minutes passes without
any operation, the Camcorder
automatically turns off to protect
the tape or to prevent the battery
from running down. When you
want to use the Camcorder, turn it
on again.
automatically turns off to protect
the tape or to prevent the battery
from running down. When you
want to use the Camcorder, turn it
on again.
≥The Camcorder cannot be automatically turned
off when you connect the USB connection cable
or the DV cable with the Camcorder or when the
Camcorder is in the PC mode.
or the DV cable with the Camcorder or when the
Camcorder is in the PC mode.
Recording still pictures on a card
while recording image onto a tape
while recording image onto a tape
You can record still pictures while recording
image onto a tape.
≥Set to Tape Recording Mode.
image onto a tape.
≥Set to Tape Recording Mode.
1
Press the [PHOTO SHOT] button fully while
recording image onto a tape.
recording image onto a tape.
≥For the number of still pictures to be recorded
on a card, refer to
≥When recording pictures onto a card, the
recording start/stop button is disabled.
PC
;
R 0:30
0h00m10s00f
100
1)
2)
3)
¢
4)
¢
5)
¢
PHOTO
SHOT
SHOT
LSQT0861Eng.book 28 ページ ２００４年１２月２２日 水曜日 午後２時３４分