Panasonic PV-GS150 User Manual

Page of 88
Record mode
34
LSQT0861
Fade in/fade out function
Fade in
The image and audio gradually appear.
Fade out
The image and audio gradually disappear.
Set to Tape Recording Mode.
1
Press the joystick until the icon 
1 appears.
2
Move the joystick left to select the fade icon 
[
].
3
Press the recording start/stop button.
Start recording. (fade in)
When you start recording, the image/audio 
disappears completely and the image/audio 
gradually appears.
Pause recording. (fade out) 
The image/audio gradually disappears. After the 
image/audio completely disappears, recording 
stops.
ª
To cancel fading
Select the [
] icon again.
ª
To select the color for fade in/out
The color which appears in fading pictures can be 
selected.
1
Set [SETUP] >> [FADE COLOR] >> [WHITE] 
or [BLACK].
≥While the fade in/fade out function is selected, it 
takes several seconds to display the image 
when you start recording images. Besides, it 
also takes several seconds to pause recording.
Wind noise reduction function
This reduces the wind noise coming into the 
microphone when recording.
Set to Tape Recording Mode.
1
Set [BASIC] >> [WIND CUT] >> [ON].
ª
To cancel the wind noise reduction 
function
Set [BASIC] >> [WIND CUT] >> [OFF].
≥Reduces the wind noise depending on the wind 
strength. (If this function is activated in strong 
winds, the stereo effect may be reduced. When 
the wind weakens, the stereo effect will be 
restored.) 
1
B
LSQT0861Eng.book  34 ページ  2004年12月22日 水曜日 午後2時34分