Panasonic PV-GS150 User Manual
With a PC
51
LSQT0861
With a PC
Using the Camcorder with a PC
An image stored on the DV Cassette can be
transferred to your personal computer.
transferred to your personal computer.
ª
Software Installation
1
Turn on Computer and start up Windows.
2
Insert supplied CD-ROM into the CD-ROM
drive.
≥[Setup Menu] appears.
drive.
≥[Setup Menu] appears.
3
Select the software to be installed from
[Setup Menu].
≥USB Driver
[Setup Menu].
≥USB Driver
The USB driver to be installed is the
dedicated Mass Storage Driver for Windows
98SE.
dedicated Mass Storage Driver for Windows
98SE.
≥Video Stream Driver
If the Camcorder is connected to your
personal computer, you can send video from
the Camcorder to the other parties via a
network or by the Internet. It is also needed
when you use MotionDV STUDIO with USB
connection.
personal computer, you can send video from
the Camcorder to the other parties via a
network or by the Internet. It is also needed
when you use MotionDV STUDIO with USB
connection.
≥DirectX
To activate MotionDV STUDIO, Microsoft
DirectX 9.0b or later should be installed. (If
you install Video Stream Driver, DirectX 9.0b
is automatically installed.)
DirectX 9.0b or later should be installed. (If
you install Video Stream Driver, DirectX 9.0b
is automatically installed.)
≥MotionDV STUDIO
:
Using the MotionDV STUDIO software allows
you to capture video recorded on a tape or
images viewed through the lens of a
Camcorder. Connecting the Camcorder with
the DV cable also allows you to output
images edited on the personal computer to
the tape in the Camcorder.
you to capture video recorded on a tape or
images viewed through the lens of a
Camcorder. Connecting the Camcorder with
the DV cable also allows you to output
images edited on the personal computer to
the tape in the Camcorder.
4
Follow the instructions on the computer
screen until the installation is complete.
≥Setup window will disappear when the
screen until the installation is complete.
≥Setup window will disappear when the
installation is complete.
Note:
If a window does not appear automatically, click
the “Start” Button on your desktop and then click
“Run”. When the “Run” Box is open, type in
“D:\InstMenu.exe” and click “OK”. (“D” is used
when the CD-ROM drive is drive D.)
If a window does not appear automatically, click
the “Start” Button on your desktop and then click
“Run”. When the “Run” Box is open, type in
“D:\InstMenu.exe” and click “OK”. (“D” is used
when the CD-ROM drive is drive D.)
Using USB Driver
ª
Operating environment
≥Despite having the operating environment
indicated, it may not be possible to use the
program with some types of personal
computers.
program with some types of personal
computers.
≥A CD-ROM drive is required to install this
program.
≥When you connect to an USB 2.0 interface
board, use a certified board with the USB 2.0
(HI-SPEED USB) logo.
(HI-SPEED USB) logo.
For Windows
OS:
IBM PC/AT compatible personal computer with
pre-installed;
Microsoft Windows 98 Second Edition
CPU:
Intel Pentium II/Celeron 300 MHz or higher
(including compatible CPU)
RAM:
32 MB or more (64 MB or more recommended)
Interface:
USB 1.1 or more
≥For Windows Me/2000/XP users, the USB
OS:
IBM PC/AT compatible personal computer with
pre-installed;
Microsoft Windows 98 Second Edition
CPU:
Intel Pentium II/Celeron 300 MHz or higher
(including compatible CPU)
RAM:
32 MB or more (64 MB or more recommended)
Interface:
USB 1.1 or more
≥For Windows Me/2000/XP users, the USB
equipment operates with the driver installed as
standard in OS.
standard in OS.
For Macintosh
OS:
Mac OS X v 10.1–X v 10.3
CPU:
iMac, iBook or Power Book G4, Power Mac G4 or
Power Mac G5
RAM:
64 MB or more
≥The USB equipment operates with the driver
OS:
Mac OS X v 10.1–X v 10.3
CPU:
iMac, iBook or Power Book G4, Power Mac G4 or
Power Mac G5
RAM:
64 MB or more
≥The USB equipment operates with the driver
installed as standard in OS.
ª
Installing the USB Driver
When your OS is Windows 98SE, please install
USB Driver first before connecting the Camcorder
to your personal computer with the USB
connection Cable.
USB Driver first before connecting the Camcorder
to your personal computer with the USB
connection Cable.
1
Turn on the personal computer and start up
Windows.
Windows.
2
Insert the supplied CD-ROM into the
personal computer’s CD-ROM drive.
≥Quit all applications.
≥[Setup Menu] appears.
personal computer’s CD-ROM drive.
≥Quit all applications.
≥[Setup Menu] appears.
3
Click the [USB Driver].
≥The set up program starts running.
≥The set up program starts running.
4
Click [Restart] if the [InstallShield] dialog
appears.
≥Do not remove the CD-ROM.
appears.
≥Do not remove the CD-ROM.
5
Finish installation by following the
on-screen instructions.
on-screen instructions.
LSQT0861Eng.book 51 ページ 2004年12月22日 水曜日 午後2時34分