Panasonic AJ-HPX3100G User Manual
114
Preparation: Preparing for Audio Input
Take the following steps to prepare the camera for connecting audio input devices.
AJ-HPX3100 can be equipped with the AJ-MC900G stereo
microphone kit (an extra-cost option).
microphone kit (an extra-cost option).
1
Open the microphone holder.
2
Mount the microphone and tighten the
clamping screw.
clamping screw.
The microphone must be attached with the UP mark on
the microphone facing up.
the microphone facing up.
3
Connect the microphone cable to the MIC IN
jack on the camera.
jack on the camera.
4
Set the AUDIO IN switch to [FRONT]
depending on the audio channel to be
recorded.
depending on the audio channel to be
recorded.
1
Remove the cover to insert the wireless
receiver and secure it with the screws.
receiver and secure it with the screws.
2
Set the AUDIO IN switch to [W.L.] depending
on the audio channel to be recorded.
on the audio channel to be recorded.
3
When using a 2-channel wireless receiver,
select “DUAL” in the WIRELESS TYPE menu
item.
select “DUAL” in the WIRELESS TYPE menu
item.
The menu item is found in the <MIC/AUDIO> screen
on the MAIN OPERATION page.
on the MAIN OPERATION page.
Preparing for Audio Input
When Using the Front Microphone
Clamping Screw
MIC IN Jack
AUDIO IN
Switch
Switch
When Using a Wireless Receiver
When Using the Unislot Wireless Receiver
AJ-HPX3100G(VQT3A79)_E.book 114 ページ 2010年9月17日 金曜日 午後9時21分