Panasonic AJ-HPX3100G User Manual

Page of 208
131
Manipulating Clips with Thumbnails: Thumbnail Manipulations Overview
 M
ani
pul
at
in
g C
lip
s w
ith
 Thu
mbn
ail
s
1
Press the THUMBNAIL button. 
The thumbnail screen appears on the LCD monitor. 
2
Press the THUMBNAIL MENU button and  
select OPERATION 
> FORMAT from 
thethumbnail menu. 
z
When the screen shown below appears, select the 
slot number of the P2 card you want to format and 
press the SET button.
z
Select EXIT if formatting is not required.
3
The following screen appears. Use the cursor 
buttons and the SET button to select YES. 
The selected P2 card is formatted. 
‹
Note
Check that no important data remains on a card before 
formatting since data erased by formatting cannot be 
recovered.
SD memory cards can also be formatted from the thumbnail 
screen. With an SD memory card inserted into the camera-
recorder, perform the following operation:
1
Press the THUMBNAIL button.
The thumbnail screen appears on the LCD monitor.
2
Press the THUMBNAIL MENU button and  
select OPERATION 
> FORMAT from the 
thumbnail menu. 
z
The following screen appears. Select “SD CARD”.
z
Select “EXIT” if formatting is not required.
3
The following screen appears. Use the cursor 
buttons and the SET button to select YES.
The SD memory card is formatted.
‹
Notes
z
SD memory cards can also be formatted from the menu 
screen.
> [To format an SD memory card] (page 92).
z
Check that no important data remains on a card before 
formatting since data erased by formatting cannot be 
recovered.
Formatting a P2 Card
Formatting SD memory cards
AJ-HPX3100G(VQT3A79)_E.book  131 ページ  2010年9月17日 金曜日 午後9時21分