Panasonic AJ-HPX3100G User Manual

88

Adjustments and Settings for Recording : Selection of video output signals

The unit employs the SDI OUT connector and the MON OUT connector as connectors for outputting video signals.

The type of output signal from the SDI OUT connector is in 
accordance with the SYSTEM MODE item. Additionally, the 
signal output from the SDI OUT connector is switched from 
the SDI OUT MODE item. 
The SYSTEM MODE can be selected from the <SYSTEM 
MODE> screen on the SYSTEM SETTING page, and the 
SDI OUT MODE can be selected from the <OUTPUT SEL> 
screen on the SYSTEM SETTING page. 

Set the characters to be superimposed on the signals output 
from the SDI OUT connector in the OUTPUT ITEM and SDI 
OUT CHAR items. Items can be selected from the 
<OUTPUT SEL> screen on the SYSTEM SETTING page. 

Selection of video output signals

Settings of signals output from SDI OUT connector

SDI OUT MODE

MEM
CAM

MEM: During EE such as recording, 

video images taken by the 
camera are output. Meanwhile, 
signals on the P2 card are 
output during playback.

CAM: Camera images are output at 

all times. 

OUTPUT ITEM

MENU

ONLY

TC
STATUS

Set the characters to be 
superimposed on the output signals 
from the VIDEO OUT connector.
MENU ONLY:

The menu screen is superimposed 
only when the menu is accessed. 
This normally displays nothing.

Time codes are superimposed 
(when the menu is accessed, the 
menu screen is superimposed.)

The characters that are the same 
as the characters superimposed in 
the viewfinder screen are 
superimposed.
(When the menu is accessed, the 
menu screen is superimposed.)

SDI OUT CHAR

OFF
ON

Select whether to superimpose 
characters on the image output from 
the SDI OUT connector. 
OFF: Do not superimpose. 
ON: Superimpose. 

‹

The content of the superimposed 
characters is the same as that 
superimposed on video output from 
the MON OUT connector

AJ-HPX3100G(VQT3A79)_E.book  88 ページ  ２０１０年９月１７日　金曜日　午後９時２１分