Panasonic PV-GS80 User Guide

Page of 84
Record mode
26
LSQT1121
Record mode
Check before recording
Check the following before recording important 
events such as weddings or when the Camcorder 
has not been used for a long time.
Conduct a test recording to make sure that the 
image recording and the audio recording work 
properly.
ª
Basic Camcorder positioning
1) Hold the Camcorder with both hands.
2) Run your hand through the grip belt.
3) Do not cover the microphones or sensors with 
your hands.
4) Keep your arms near your body.
5) Slightly open your legs.
≥When you are outdoors, record pictures with the 
sunlight as far in the background as possible. If 
the subject is backlit, it will become dark in the 
recording.
ª
Check points
≥Remove the lens cap. (
-13-
)
(When the Camcorder is turned on with the lens 
cap fitted, the automatic white balance 
adjustment may not function properly. Please 
turn the Camcorder on after removing the lens 
cap.)
≥Grip belt adjustment (
-13-
≥Open the LCD monitor or extend the viewfinder.
(Recording cannot start while the LCD monitor 
is closed and the viewfinder is retracted. Even if 
the LCD monitor and viewfinder are closed 
during recording, the power will not turn off until 
recording stops.)
≥Adjusting LCD monitor/viewfinder (
-24-
)
≥Power supply (
-14-
≥Insert a cassette/card (
-19-
,
-20-
)
≥Setting date/time (
-16-
≥Setting SP/LP mode (
-26-
)
ª
About auto mode
≥Set the [AUTO/MANUAL/FOCUS] switch to 
[AUTO], and color balance (white balance) and 
focusing will be adjusted automatically.
≥Auto white balance: 
-69-
≥Auto focusing: 
-69-
≥Depending on the brightness of the subject etc., 
the aperture and shutter speed are 
automatically adjusted for an optimum 
brightness. (When set to the tape recording 
mode: The shutter speed is adjusted to a 
maximum of 1/250.)
≥Color balance and focus may not be adjusted 
depending on light sources or scenes. If so, 
manually adjust the white balance and focus.
≥Scene mode setting (
-36-
≥White balance setting (
-37-
≥Shutter speed setting (
-38-
≥Iris/gain value setting (
-38-
≥Focus setting (
-38-
ª
Recording mode
You can switch the tape recording mode.
Set to Tape Recording/Playback Mode.
1
Set [BASIC] or [ADVANCED] >> 
[REC SPEED] >> [SP] or [LP].
If the LP mode is selected, the recording time will 
be 1.5 times the SP mode, but some functions will 
be disabled.
≥We recommend using the SP mode for 
important recording.
≥In order to fully exhibit the performances of the 
LP mode, we recommend using Panasonic 
cassettes marked LP mode.
≥In the LP mode, the picture quality will not be 
degraded in comparison with the SP mode, but 
mosaic noise may appear on the playback 
image or some functions may be disabled.
≥Playback on other digital video equipment 
or on digital video equipment without the LP 
mode.
1)
4)
5)
2)
3)
S5660.book  26 ページ  2006年10月30日 月曜日 午後6時56分